True. A change in velocity can be either a change in speed (how fast something moves) or a change in direction — and in fact it can be both at once. Velocity is a vector, meaning it carries both a magnitude (speed) and a direction, so any alteration to either quantity counts as a change in velocity, which physicists call acceleration.
That single definition is what makes the statement true, and it's also where most people get tripped up. The word "velocity" gets used interchangeably with "speed" in everyday conversation, but in physics they're different animals. Once you see velocity as an arrow with a length and a pointing direction, the true/false question answers itself — and a whole set of related exam questions suddenly make sense.
This article walks through why the statement is true, what counts as a change in velocity, the classic examples teachers use (and the ones that trip students up), and the edge cases where the wording gets slippery.
Why Velocity Is a Vector and Speed Is Only a Number
Velocity is a vector quantity: it has magnitude and direction. Speed is a scalar — just the magnitude, no direction attached. That distinction is the entire foundation of the true/false statement, because "change in velocity" inherits both components.
A car cruising at 60 mph due north has a velocity of 60 mph north. If it keeps that exact speed but turns to head due east, its velocity has changed even though the speedometer never budged. The magnitude stayed at 60; the direction rotated 90 degrees. Physics counts that as acceleration.
This is why your car's speedometer can read a perfectly steady 45 mph while you feel yourself pushed sideways against the door on a highway curve. Your body is responding to the change in velocity's direction, not its size. The speed is constant; the velocity is not.
The units tell the same story. Speed is measured in meters per second (m/s) or miles per hour. Velocity is also measured in m/s or mph but always with a stated direction — "30 m/s east," "12 m/s at 40 degrees above horizontal." Drop the direction and you've described speed, not velocity.
The Physics Definition: Acceleration Is Any Change in Velocity
Acceleration is defined as the rate of change of velocity, which means it occurs whenever velocity changes — in magnitude, in direction, or both. The standard formula is a = Δv / Δt, where Δv is the change in velocity and Δt is the time over which it happens. Because velocity is a vector, Δv is a vector subtraction, not simple arithmetic.
That vector subtraction is where students stumble. If a ball moving east at 5 m/s bounces off a wall and returns west at 5 m/s, the speed is unchanged before and after, but the velocity change is 10 m/s — because the directions are opposite, the vectors subtract to a larger magnitude than either one alone. The acceleration during the bounce is large and points west.
According to the standard treatment in introductory physics textbooks like Halliday, Resnick, and Walker's Fundamentals of Physics, acceleration exists any time the velocity vector changes, whether or not the speed changes. This is the formal reason the true/false statement is true.
A quick audit of the terms keeps it clean:
| Quantity | Type | Changes when… | Example of change with no speed change |
|---|---|---|---|
| Speed | Scalar | Magnitude changes | None — speed by definition only has magnitude |
| Velocity | Vector | Magnitude or direction changes | Car rounding a curve at constant 30 mph |
| Acceleration | Vector | Velocity changes at all | Circular motion at constant speed |
The middle row is the one the question is testing. Velocity changes in two distinct ways, and the statement names both.
Everyday Examples Where Only the Direction Changes
The cleanest way to see a direction-only velocity change is uniform circular motion. A satellite in a stable orbit moves at a constant speed — for a low Earth orbit, roughly 7.8 kilometers per second — yet it's continuously accelerating toward Earth because its direction of travel keeps curving. The speed never changes; the velocity does, every instant.
A child on a merry-go-round is the playground version. Ride at a steady rotation rate and your speed relative to the center is constant, but you're constantly changing direction, so your velocity is constantly changing. You feel a pull toward the outside, and the ride is doing work to keep redirecting you. Same principle, smaller scale.
A car turning a corner at a steady 25 mph is the example most drivers have felt. The turn itself is a change in velocity even though the speedometer holds at 25. If the turn is sharp enough and fast enough, the sideways acceleration exceeds what the tires can deliver and the car skids — a failure case that shows the direction change is physically real, not just bookkeeping.
A pitched baseball curving over the plate is another. The pitcher imparts spin, and the Magnus effect pushes the ball sideways, curving its path. The ball's speed changes only slightly, but its direction changes enough to fool the batter. That's a change in velocity doing real work.
Examples Where Speed Changes but Direction Stays Fixed
Straight-line acceleration is the mirror case: speed changes while direction holds. A dragster launching down a straight strip accelerates from 0 to over 300 mph in about four seconds; its direction stays essentially constant, but its speed climbs enormously, so its velocity changes continuously. That's acceleration in the everyday sense.
A car braking to a stop at a red light is the same thing in reverse. The direction stays fixed, but the speed drops to zero, so the velocity changes — and the acceleration points opposite to the motion. This is why "deceleration" is just acceleration with a negative sign relative to the direction of travel.
A free-falling object dropped straight down is a clean example. Ignoring air resistance, it accelerates downward at about 9.8 m/s² near Earth's surface, and its speed increases every second while its direction stays pointed at the ground. Its velocity changes purely in magnitude.
A sprinter accelerating out of the blocks is a fourth. The direction is essentially fixed down the lane, but the speed rises from zero to top speed over the first few seconds. Velocity changes; direction doesn't.
Cases Where Speed and Direction Both Change at Once
Most real motion changes both at once, and the statement's "either… or" doesn't forbid that. A car accelerating through a sweeping highway on-ramp is speeding up while curving — velocity changes in both magnitude and direction simultaneously.
A projectile launched at an angle is the textbook combined case. A soccer ball kicked at 20 m/s at 30 degrees above horizontal has both a horizontal and vertical velocity component. Gravity pulls the vertical component down continuously, so the ball's speed changes and its direction changes throughout the flight. At the top of the arc, the vertical velocity is momentarily zero but the horizontal velocity remains, so the ball is still moving — and still accelerating downward.
A roller coaster taking a banked turn while climbing is another. The car speeds up on the descent and slows on the ascent while the track curves, so both components of velocity shift. Engineers size the track and banking to keep the forces within safe limits — a design consequence of velocity being a vector.
A plane banking into a turn while climbing is a fourth. The aircraft's speed may hold steady or change, but the direction of travel swings through the turn and the altitude changes, so velocity changes on both counts. Pilots feel this as a combination of g-force changes and the sensation of being pushed into the seat.
How Textbooks and Curricula Treat the Statement
The true/false statement appears in physics curricula because it tests whether students grasp the vector nature of velocity, and the standard answer key marks it true. OpenStax College Physics, a widely used free textbook, defines acceleration as a change in velocity — explicitly noting that a change in direction counts even when speed is constant.
The Next Generation Science Standards treat this at the high school level under HS-PS2-1, which asks students to analyze data to support the claim that Newton's second law describes the relationship among force, mass, and acceleration. Velocity as a vector is a prerequisite for that analysis, so the distinction gets tested early.
A common exam trap is a statement like "an object moving at constant speed cannot be accelerating." That's false, and it's the inverse of the true/false question here. A car on a circular track at constant speed is accelerating because its direction changes. Students who conflate speed with velocity get this wrong.
Another trap: "acceleration always means speeding up." Also false under the physics definition. Braking is acceleration, and turning at constant speed is acceleration. The everyday meaning of "accelerate" — to go faster — is narrower than the physics meaning, which is any velocity change.
Worked Example: Proving the Two Cases With Numbers
Take a car that travels around a circular track of radius 100 meters at a constant speed of 20 m/s. Its speed is 20 m/s throughout, so there's no speed change. But its direction changes continuously, and the centripetal acceleration is v²/r = (20)²/100 = 400/100 = 4 m/s², directed toward the center of the circle. That's a real acceleration caused entirely by a direction change.
Now take the same car on a straight road, accelerating from 20 m/s to 30 m/s over 5 seconds. The direction is fixed, so there's no direction change, but the acceleration is Δv/Δt = (30 − 20)/5 = 2 m/s² along the road. That's a real acceleration caused entirely by a speed change.
Both cases produce nonzero acceleration by different routes. The first changes direction only; the second changes speed only. A third case — the car speeding up from 20 to 30 m/s while rounding the same 100-meter curve — combines both, and the total acceleration is the vector sum of the tangential 2 m/s² and the centripetal component, which grows as speed rises.
That vector sum is why engineers care. On a real curve, if the driver speeds up, the centripetal demand rises with the square of speed, and the tires have a finite grip budget. Exceed it and the car leaves the curve — a failure mode traceable directly to the definition in the statement.
Where the Wording Gets Slippery: Edge Cases and Misreadings
The statement says "either… or," which some readers misread as "exclusively one or the other." In physics, "either A or B" in this context means "A is sufficient, B is sufficient" — not that both can't happen together. A velocity change can be a speed change, a direction change, or both, and all three satisfy the definition.
Another edge case is an object at rest. A stationary object has zero velocity, and it stays that way unless a force acts. There's no velocity change, so no acceleration, which is consistent with Newton's first law. If a force nudges it into motion, both speed (from zero) and possibly direction change, and the statement covers that too.
A subtler case is an object reversing direction along a straight line, like a ball thrown straight up. At the top of its flight, its speed is momentarily zero, but its acceleration is still 9.8 m/s² downward. The direction of velocity flips from up to down, so velocity changes through the reversal even though the path is a straight line.
A final misreading: some students think "change in direction" requires a curved path. It doesn't. A ball bouncing off a wall changes direction instantaneously along a straight-line path before and after; the velocity change happens during the brief contact, and the acceleration during that contact is large.
FAQ
Is a change in velocity always called acceleration?
Yes — in physics, any change in velocity, whether in speed or direction, is acceleration by definition. That includes slowing down (negative acceleration relative to motion) and turning at constant speed. The everyday sense of "accelerating" as "speeding up" is narrower than the physics term.
Can an object accelerate without changing speed?
Yes. A car rounding a curve at a steady 30 mph is accelerating because its direction changes, even though the speedometer holds steady. The centripetal acceleration points toward the center of the curve, and its size is v²/r, so tighter curves and higher speeds demand more of it.
What's the difference between velocity and speed in one sentence?
Speed is how fast something moves, with no direction attached; velocity is speed plus the direction of motion. That's why a car turning at constant speed has changing velocity but constant speed, and why the true/false statement is true.
Does a ball thrown straight up change velocity at the top of its flight?
Yes. At the peak, the ball's speed is momentarily zero, but gravity still accelerates it downward at about 9.8 m/s². Its velocity reverses from upward to downward, so the velocity changes through the top even though the path is a straight vertical line.
Why does a constant-speed turn feel like a force pushing you sideways?
Because your body is being accelerated — your velocity's direction is changing, and you feel the seat or door pushing you to keep you moving in the curve. The sensation is real acceleration caused by a direction change, not a speed change, and it's the same effect that makes a merry-go-round feel like it's pulling you outward.
Is "deceleration" a change in velocity?
Yes. Slowing down is a change in speed, which is a change in velocity, so it's acceleration with the vector pointing opposite the motion. Physics textbooks generally just call it negative acceleration rather than using a separate term, because the definition doesn't distinguish between speeding up and slowing down.
How do I explain this to someone who thinks velocity and speed are the same?
Use the car-on-a-curve example: at a steady 30 mph around a bend, the speed is constant but the direction changes, so the velocity changes and the car is accelerating. If they accept that the turn feels different from driving straight, they've accepted that direction is part of velocity.