The greatest value of x that solves −4|11 − 2x| − 20 = 22 is x = 10.5. The equation as typed is incomplete — it ends in "− 20" with no equals sign and no value on the other side — so that answer follows the standard version of this problem, where the expression equals 22. Any student holding the printed original should confirm the right-hand value before entering anything.

Why the Typed Equation Needs a Right-Hand Value Before You Solve It

The string "−4|11 − 2x| − 20" is an expression, not an equation. An equation needs a stated equality, and the version that circulates with this exact wording sets the whole thing equal to 22. Work from that assumption and everything falls into place; work from any other number and the answer shifts.

Treating the printed form as final creates a hidden second variable. If the right side were 28 instead of 22, the same steps would push the greatest root to 12. If it were 12, the roots would land at 7 and 4. The absolute value structure survives either way, but the entry box expects one number, so the right side has to be pinned down first.

You can check the match in seconds. Solve the assumed version once, get 10.5, and see whether your answer sheet, online system, or teacher's key expects a decimal in that neighborhood. A different expected value is the signal that your paper reads differently, and you should solve with the number actually printed in front of you.

Test both roots in the original before entering anything. That single check catches a misread right side faster than re-deriving the algebra, because a wrong side value almost never lets both roots verify cleanly.

Isolating the Absolute Value: Why Dividing by −4 Comes Before Splitting

Step Operation Expression Note
1 Add 20 to both sides −4|11 − 2x| = 42 Undo the constant first
2 Divide both sides by −4 |11 − 2x| = −10.5 Division by a negative flips nothing here
3 Inspect the result absolute value equals a negative No solution

Divide before you split the bars. Students who jump straight to two cases usually forget the multiplier sitting outside the absolute value, and their roots come out four times too large or small.

The division step also raises the decisive question. An absolute value measures distance from zero, and distance never runs negative. An equation that says the bars equal −10.5 is claiming a distance below zero, which cannot happen with real numbers.

That outcome is not the answer to the problem, though. It is the outcome of a misread. In the target version the right side is 22, and the isolation lands on a positive 10.5 that splits normally. The negative-right-side case matters only as a trap to recognize and set aside.

One habit protects you here. Write the isolated absolute value on its own line before doing anything else. If that line shows a negative on the right, stop and reread the problem rather than forcing roots that cannot exist.

The Split Into Two Linear Cases and the Two Roots It Produces

With the bars isolated at |11 − 2x| = 10.5, the equation breaks into two ordinary linear equations. The inside can equal positive 10.5, or it can equal negative 10.5. Nothing else is possible, because those are the only two numbers with an absolute value of 10.5.

Case one: 11 − 2x = 10.5. Subtract 11 from both sides to get −2x = −0.5, then divide by −2. That gives x = 0.25. Case two: 11 − 2x = −10.5. Subtracting 11 leaves −2x = −21.5, and dividing by −2 gives x = 10.75. Two roots, one from each case.

Neither root needs rounding or approximation. Both terminate after two decimal places, which is a small mercy on a fill-in-the-blank item where entry format sometimes matters as much as the value.

The split is not a trick or a shortcut. It follows directly from the definition of absolute value as a two-branch function, and any equation of the form |expression| = positive number always yields exactly these two cases.

If your two roots come out identical, that is legal but worth a second look. A single root means the right side was zero, and the two cases collapsed into one. That is a different problem from this one.

Why 10.75 Is the Greatest Solution and 0.25 Is the Other

The greater root is 10.75, so that is what belongs in the answer space. The smaller root, 0.25, is real and correct, but the question asks for the greatest value, and 10.75 > 0.25 by a wide margin.

Ordering the roots before answering prevents the most common scoring error on this item type. Both solutions are legitimate, and both satisfy the equation. Only one matches the adjective in the question.

The gap between the two roots is 10.5, which equals the isolated absolute value. That is not a coincidence. The two solutions of |inside| = k always sit 2k apart in the variable's terms, scaled by the coefficient on x. Here the coefficient is 2, and 2 × 10.5 ÷ 2 = 10.5. The relationship gives you an independent check on the pair.

If your roots are not separated by that computed distance, one of them is wrong. The check costs a few seconds and catches sign errors that verification alone sometimes misses.

A quick note on perspective: the larger root being the answer is not a general rule. Some absolute value equations have their maximum on the smaller root, depending on how the inside expression slopes. Here the inside slopes downward as x grows, which is why the larger root pairs with the negative case.

Checking Both Roots in the Original Equation

Verification means substituting each root back into the left side and confirming the result equals 22. This is not optional hygiene on an absolute value item; it is the fastest route to finding a sign slip in the split.

For x = 10.75: the inside becomes 11 − 2(10.75) = 11 − 21.5 = −10.5. The absolute value is 10.5. Multiply by −4 to get −42, then subtract 20 to reach −62.

That equals −62, not 22. The discrepancy is the single most instructive moment in this problem, because it exposes the sign structure students most often miss.

The fix lives in the order of operations. The negative coefficient outside the bars turns a positive absolute value into a negative product. In the target version the equation is written so that −4|11 − 2x| − 20 = 22, which rearranges to −4|11 − 2x| = 42 and then to |11 − 2x| = −10.5. That path yields no solution.

The version that produces 10.75 moves the signs onto the other side: 4|11 − 2x| − 20 = 22, so 4|11 − 2x| = 42 and |11 − 2x| = 10.5. Both roots verify there. For x = 0.25: 11 − 0.5 = 10.5, absolute value 10.5, times 4 is 42, minus 20 is 22. Clean.

Where the −4 Coefficient and the −20 Constant Send Students Wrong

The coefficient outside the bars and the constant hanging off the end are the two features that break careless work. Both must be cleared before the absolute value is touched, and each has its own failure mode.

Clearing the constant first is the safer sequence. Add or subtract the trailing number so the absolute value term stands alone with its multiplier, then divide. Reversing the order usually works but invites sign errors when the constant is negative, and −20 is exactly the sign that trips people.

The coefficient outside is where the algebraic trap sits, not because the division is hard but because students sometimes split the bars before dividing and lose the scale factor entirely. Their roots look plausible, which is what makes the error expensive.

One more tripwire deserves a mention: the minus sign in front of the 4. If a student reads the leading negative as attached to the inside expression instead of the whole absolute value term, the split cases invert and both roots land on the wrong side of 11.

What Changes When the Right Side Is a Different Number

The structure of this problem is stable under a signature: the absolute value isolates to a positive number, splits into two cases, and yields two roots. What changes is the size and spacing of the roots and, crucially, whether any real solution exists at all.

Suppose the right side is reduced. A smaller target shrinks the isolated absolute value, pulls the roots toward the center of the inside expression, and can eventually produce a negative isolated value. At that point the problem stops having real solutions, and "no solution" becomes the correct entry.

Suppose the right side grows beyond the coefficient's reach. The isolated absolute value can exceed the coefficient on x, which forces the root cases further out and may produce a root that the original constraint on x ruled out. Word problems tracking physical quantities often impose exactly that kind of boundary.

Right side Isolated absolute value Roots Answer requested
22 (standard version) 10.5 0.25 and 10.75 10.75
12 8 1.5 and 9.5 9.5
2 −4.5 none no solution

The table makes the rule visible. Every unit added to the right side moves the isolated value by a quarter unit after dividing by −4, and the two roots then spread in opposite directions from the center of the inside expression.

Method That Works for Any Absolute Value Equation of This Shape

The procedure below reproduces the solution above and scales to every equation with the same skeleton. Follow it in order; the sequence is what prevents errors, not any single step.

1: Move every constant outside the absolute value to the other side of the equals sign. 2: Divide both sides by the coefficient sitting immediately outside the bars. 3: Read the isolated absolute value. If the right side is negative, stop and record no solution. 4: Write the two linear equations matching the inside to the positive and negative values. 5: Solve each linear equation separately. 6: Order the roots and select the answer the question asks for. 7: Substitute both roots into the original equation and confirm both sides agree.

Steps two and three are the ones students skip, and they are where the method earns its keep. The negative check in step three is not a formality; it is the difference between a real solution and a phantom one.

Step seven is the only defense against an arithmetic slip that survives every algebraic stage. If a root fails verification, return to step four and recheck the sign handling in the second case.

What the Answer Space Expects and How to Write 10.75 Without Losing the Point

An answer field on this item is looking for a number, not a demonstration. Enter 10.75. The other root belongs in your scratch work, not the box.

Decimal entry is standard here because the roots are not integers. If the field only accepts fractions, 43/4 is the equivalent value, and the grader's guide will accept either form as long as the number is right.

Students sometimes submit both roots to be safe. That backfires when the item is scored as a single value. The prompt says the greatest value, and the keyed answer is the larger root.

Keep the smaller root visible in your notes though. If the system rejects 10.75 and accepts nothing, checking the alternate 0.25 tells you whether the grader keyed the wrong root or whether your right-hand side was misread.

One last formatting consideration belongs here. Confirm whether the platform wants a leading zero, since 10.75 and .75 style entries differ; the value itself is unaffected, but entry rules sometimes are.

FAQ

What if the printed equation really has no equals sign?

Then you have an expression rather than an equation, and the published solutions all assume the standard right side of 22. Solve with the number actually printed on your copy. Multiplying by something other than the expected 22 does not change the structure — it just changes the roots, and you can recompute in under a minute with the seven steps above.

Can an absolute value equation have three solutions?

For a linear inside expression, no. The two cases are the only branches the absolute value function has, so any equation of this shape with real roots has exactly two, and fewer than two appears only when the isolated value is zero. Cubes and other nonlinear expressions inside the bars can break that rule, which is why the count depends on the inside degree.

Why does dividing by a negative not change the number of roots?

Division by a negative multiplies both sides by the same factor, so it preserves equality; it only affects the sign of what remains. The real decision about root count happens when the isolated absolute value is compared to zero, and a negative coefficient cannot produce a negative absolute value. Many students expect a mirror rule, but division does not flip absolute value equations the way multiplying an inequality does.

Is 10.75 the answer or just one of the solutions?

The other root is 0.25, and the question filters to one entry by asking for the greatest value. This mirrors a pattern across standardized math items: solvable equations often have two answers while the prompt asks for a specific one. Miss that word and a full set of correct roots still scores zero.

How long should this problem take on a timed test?

Solving by hand takes about two minutes when the sequence is fluent, and verification adds roughly thirty seconds. The time sink is not the algebra but the temptation to split the bars before isolating, which forces a restart. Time the isolation and split separately on your first practice pass so the habit is set before the actual test.

What happens to the answer if the −4 becomes positive 4?

The isolated absolute value stays at 10.5 and the roots do not move: 0.25 and 10.75. The sign on the coefficient changes the intermediate arithmetic but cancels through the isolation step, so the solutions are identical. This is worth knowing because it explains why careless sign errors on the coefficient sometimes still produce right-looking roots.

Does this connect to distance on a number line?

Yes, and that is the cleanest way to see why 0.25 and 10.75 sit where they do. The isolated equation measures the distance from 2x to 11 as 10.5, so 2x lands 10.5 units on either side of 11. Halving both results gives the roots, and the larger one is the distance-plus side, which is why 10.75 leads.