The equation is c = 2.75g, where c is the total cost in dollars and g is the number of gallons pumped. That single line is a direct proportion: every gallon adds exactly $2.75 to the bill, so the cost doubles when the gallons double and halves when they halve. It holds for any non-negative number of gallons at that station on that day. Once you know the rate, the rest is arithmetic you can do in a parking lot without a spreadsheet.

Reading the Sentence as Algebra Before You Write Anything

The phrase "2.75 per gallon" is the whole equation hidden in plain English. "Per" means division or, more usefully here, a rate applied to each unit. The total is that rate multiplied by however many units you take, so c = 2.75 × g compresses cleanly to c = 2.75g.

Identify the two quantities before touching symbols. The independent variable is g, the gallons you choose; the dependent variable is c, the cost that results. Cost depends on gallons, never the reverse, which is why c sits alone on the left side.

The number 2.75 is called the constant of proportionality, and it carries units of dollars per gallon. Writing it as $2.75/gal keeps the units honest: gallons cancel, dollars remain. This is why c = 2.75g gives an answer in dollars rather than in some meaningless hybrid unit.

Purchase volume is a continuous quantity, not a whole number. You can pump 0.5 gallons, 7.3 gallons, or 11.87 gallons, and the equation treats all of those as valid inputs. That continuity matters later when you solve for gallons given a budget, because the answer is rarely a round number.

Why c = 2.75g Works for Every Fill and Where the Rate Comes From

The $2.75 rate is the posted price per gallon at that station, set by the station operator and driven by crude oil markets, regional taxes, and wholesale contracts. The U.S. Energy Information Administration publishes a weekly breakdown of the national average by component, and taxes alone vary by state by tens of cents per gallon. That state-level spread is why a $2.75 sign in one state describes a different cost structure than an identical sign elsewhere.

Gasoline is priced to the tenth of a cent at the pump, so a sign showing $2.75 usually reflects a number like $2.7499 rounded for display. The equation uses 2.75 as the working figure. If your receipt shows a third decimal place, substitute the exact per-gallon figure for a precise total, because the tenth-of-a-cent difference on a 15-gallon fill is small but nonzero.

The linear form holds because the pump meter increments by volume and the register multiplies by a fixed rate. No station charges a different per-gallon price for gallon two than for gallon ten. Discount programs like a grocery loyalty card or a credit card rebate complicate things by shaving a few cents per gallon, and if you use one, the equation becomes c = (2.75 − d)g where d is your discount in dollars per gallon.

Rounding happens at the register, not inside the equation. A mathematical total of $20.625 would ring up as $20.63 or $20.62 depending on the station's rounding convention, and most round to the nearest cent. Keep your equation exact and apply rounding only to the final answer.

Worked Calculations From a 5-Gallon Top-Off to a 25-Gallon Fill

Substitute first, then multiply. For 8 gallons, c = 2.75 × 8 = $22.00. For 12 gallons, c = 2.75 × 12 = $33.00. The pattern is easy to check because 2.75 × 4 = $11, so every 4 gallons lands on a clean multiple of $11.

Gallons (g) Computation Total cost (c)
0 2.75 × 0 $0.00
3 2.75 × 3 $8.25
5 2.75 × 5 $13.75
8 2.75 × 8 $22.00
10 2.75 × 10 $27.50
12 2.75 × 12 $33.00
15 2.75 × 15 $41.25
20 2.75 × 20 $55.00
25 2.75 × 25 $68.75

The table exposes the additive structure of the proportion. Each row adds $2.75 to the row above when g increases by 1, and each row adds exactly twice as much when g doubles. A 10-gallon fill costs $27.50, and a 20-gallon fill costs $55.00, which is literally double.

Check your arithmetic against the $11-per-4-gallons anchor. A 14-gallon fill should be $11 × 3.5 = $38.50, and indeed 2.75 × 14 = $38.50. If your mental math gives a wildly different figure, you mismultiplied a decimal rather than misread the rate.

Run the reverse direction too, because it catches sign and division errors. If you spent $49.50, then g = 49.50 ÷ 2.75 = 18 gallons. Buyers often solve this backward at the pump when they have a fixed amount of cash and want the most fuel possible.

Solving Backwards: How Many Gallons $40 Actually Buys

Divide the budget by the rate. With $40, g = 40 ÷ 2.75 = 14.5454…, so the pump stops somewhere between 14.5 and 14.6 gallons if you pay by card. Cash budgets with no card fallback usually stop at the last whole or half gallon the attendant allows, so plan for $38.50 for 14 gallons if you want a clean cash transaction.

That division result is a periodic decimal, 14.54 repeating, which illustrates why the linear equation is friendlier than the inverse when you're at the pump. The price scales the other way too, so a $60 budget at $2.75 buys 21.82 gallons. Set the dollar amount, divide, and you have your ceiling.

Substituting the same budget into the forward equation verifies the answer. Plug g = 14.5454 into c = 2.75g and you get 40.000, confirming the boundary. Always re-substitute after a division step; it catches a flipped ratio.

The relationship also lets you compare stations without visiting both. If station A sells at $2.75 and station B sells at $2.89, a 15-gallon fill costs $41.25 at A and $43.35 at B, so B costs $2.10 more for that tank. Driving five miles out of the way for 14 cents per gallon saves $2.10 but burns roughly a fifth of a gallon, about $0.55 at the same rate, so the net advantage holds but narrows.

What the Graph Looks Like and Why It Passes Through the Origin

Plot g on the horizontal axis and c on the vertical axis, and every solution falls on a straight line through the origin. The point (0, 0) is on the graph because pumping zero gallons costs zero dollars. This origin crossing is the visual signature of a direct proportion, and it distinguishes the equation from a line with an initial fee.

The slope of the line is 2.75, the rate itself, which means climbing 1 unit on the horizontal axis raises the vertical value by 2.75 units. Plot (4, 11) and (8, 22), and the rise over run is (22 − 11) ÷ (8 − 4) = 11 ÷ 4 = 2.75. The slope is not a vague steepness; it is the price per gallon made visible.

Any point on the line is a valid fill, not just lattice points at whole gallons. The midpoint between (10, 27.50) and (12, 33.00) is (11, 30.25), and 2.75 × 11 = 30.25 confirms it. Real pumps give fractional gallons, so the line's intermediate points carry real-world meaning.

The graph's straightness is a simplifying assumption worth naming. Stations sometimes tier prices by payment method, so a card price and a cash price produce two parallel lines with different slopes, both through the origin. If a station charged a flat service fee, the line would instead start above the origin at the fee amount, and the equation would gain a constant term.

Budgeting a Road Trip With Two Rate Regimes

Pair the equation with a fuel-economy figure to plan a drive. If your car returns 28 miles per gallon on the highway, then a 420-mile leg needs exactly 420 ÷ 28 = 15 gallons, and 15 × 2.75 = $41.25. The proportional structure chains: miles ÷ mpg gives gallons, gallons × rate gives dollars.

Trip leg Miles Gallons at 28 mpg Cost at $2.75/gal
Short hop 140 5.0 $13.75
Half-day drive 280 10.0 $27.50
Full-day drive 420 15.0 $41.25
Two-day haul 840 30.0 $82.50

The table shows why the multiplication never becomes painful. Doubling the distance doubles the gallons and doubles the dollars, so a two-day haul at the same rate is exactly twice the one-day figure. Break the trip into legs at the same mpg and rate, and the totals add cleanly.

Regional price variation breaks the assumption that one rate holds for a whole trip. State motor fuel taxes differ substantially, and the federal tax of 18.4 cents per gallon sits on top of every state's own levy, so a state line can shift the per-gallon figure by 30 cents or more. Recalculate the table with the local rate at each stop rather than carrying one rate across three states.

Tolls, detours, and idling eat into the estimate without changing the equation. A 30-minute stop-and-go delay burns fuel at zero miles per gallon, so the gallons column grows while the miles column stays flat. Add a 5 percent buffer to your gallons estimate for any long trip, and the resulting cost buffer scales proportionally.

Reading a Real Pump: Displayed Gallons, Tenths, and Rounding

A pump display typically shows gallons to three decimals and dollars to two, so the register may disagree with your hand calculation by a cent. When the display reads 11.354 gallons, the exact product is 2.75 × 11.354 = $31.2235, which rings up as $31.22. Your equation answer was right; the machine simply truncated to currency precision.

Watch the units at the discount terminal. Some card-linked programs advertise "10 cents off per gallon," and 10 cents is $0.10, not $0.010. Applying a $0.10 discount makes the effective rate $2.65 and the equation c = 2.65g, which on a 15-gallon fill saves $1.50. Misreading the discount as a penny per gallon understates the saving by 90 percent.

Split payment between cash and card creates a two-rate purchase. If you prepay $20 in cash and finish with a card, price each segment with its own rate and add the results. Mixing the two rates into one slope produces a total that matches no receipt.

Check the sign of the rounding difference. Truncating the gallons to the display's three decimals can shave a fraction of a cent off some purchases and add a fraction to others, but the deviation never exceeds about half a cent on a full tank. If your receipt is off by five dollars, the rate changed mid-transaction or you miscalculated a decimal.

When the Straight Line Breaks: Discounts, Minimums, and Card Holds

Debit and credit card holds at the pump often authorize $75 or $100 regardless of the actual fill, then reconcile to the true total after the nozzle clicks off. The final charged amount is still 2.75g, but your bank balance temporarily shows the hold. Budget with the equation, watch the hold, and expect the charge to settle within a day or two.

Minimums and prepay rules impose a floor that the equation ignores. A station requiring a $5 minimum purchase means an effective total of max(2.75g, 5), so 1 gallon costs $5 rather than $2.75. That piecewise form is still linear above the threshold, but a single simultaneous equation fails below it.

Fuel rewards tied to grocery spending sometimes take a fixed dollar amount off the total rather than a per-gallon rate. A $0.10-per-gallon reward behaves as a slope change, but a $2-off total is a vertical shift: c = 2.75g − 2, which is no longer a proportional relationship and no longer passes through the origin. Read the reward terms carefully, because a masked "cents off" program that pays out as a lump sum breaks the proportional model entirely.

Prices change during a single session at high-traffic stations in volatile markets. The posted rate when you start pumping governs the transaction, and the equation's constant is whatever the sign read at that moment. Lock in the rate on your receipt before doing reverse math, or you'll divide by a price the pump stopped honoring.

Answering the Question the Way a Teacher Expects It

State the equation first, define the variables, then show the substitution. A complete written answer reads: "Let c = total cost in dollars and g = gallons purchased. Since each gallon costs $2.75, c = 2.75g." Teachers award credit for the definition step because the equation alone doesn't prove you know which variable is which.

Verify with a test value, and include it. Plug g = 4 into the equation to get c = 11, and note that 4 gallons at $2.75 each is $11, consistent with the sentence. Showing that the equation reproduces an easy mental calculation proves the proportion is correctly oriented.

Write the rate with its units in the final answer. "c = 2.75g dollars per gallon" is sloppy; better is "c dollars = 2.75 dollars/gallon × g gallons." Unit accounting is the difference between a memorized answer and a justified one.

If the question asks whether the relationship is proportional, the answer is yes, because the graph passes through (0, 0) and the ratio c/g equals 2.75 for every nonzero g. That constant-ratio test is the formal definition, and it holds across the entire domain.

FAQ

Is c = 2.75g proportional or linear?

It is both, and the distinction is that proportional is a stricter label. A proportional relationship must be linear and pass through the origin, meaning zero gallons cost zero dollars with no startup fee. Because 2.75 × 0 = 0, the equation satisfies that condition and is proportional in the full mathematical sense.

How many gallons can I buy with $50 at this station?

Divide 50 by 2.75 to get 18.1818…, so you can pump 18.18 gallons and still have a fraction of a cent left over. Most pumps stop at three decimal places, so the transaction lands near 18.181 gallons and a little change remains. If you prepay exactly $50 in cash, the attendant sets the pump to stop at that dollar amount, which yields the same volume.

What happens to the equation if the price drops to $2.50 a gallon?

The constant of proportionality changes from 2.75 to 2.50, giving c = 2.50g. A 15-gallon fill then costs $37.50 instead of $41.25, a saving of $3.75. Only the slope changes; the line still passes through the origin and the proportional structure survives intact.

Does the equation still work if I buy exactly one gallon?

Yes: c = 2.75 × 1 = $2.75, which matches the posted rate by definition. The only complication is station policy on card purchases, because many card readers require a minimum authorization that exceeds a single gallon's cost. Pay cash for a one-gallon top-off if the station enforces a higher minimum.

Why does my receipt show a total a penny off from my calculation?

Pump meters round gallons to three decimals and dollars to the nearest cent, so the register's total can differ from an exact fractional calculation by up to half a cent per line. A $20.625 exact product rings up at $20.63 under standard rounding, which looks like a penny error. Recompute using the three-decimal gallon figure shown on the display and the gap usually closes.

What if the station charges a flat fee on top of the per-gallon price?

Then the equation gains an intercept and becomes c = 2.75g + f, where f is the fixed fee in dollars. This breaks proportionality because zero gallons would cost f rather than zero, but it remains a linear relationship with slope 2.75. Few U.S. stations charge a per-transaction fee on fuel, but full-service lanes and some commercial card arrangements do.

Can this equation help compare two stations with different prices?

Compare slopes directly: a lower per-gallon price means a lower slope and a cheaper total at every positive gallon count. At $2.75 versus $2.89, a 12-gallon fill costs $33.00 against $34.68, a $1.68 difference. The comparison flips only if a station charges a fixed fee large enough to overcome its lower slope at small purchase volumes.

How do I write the equation if I only know I spent $22?

Work backward by dividing: g = c ÷ 2.75, so $22 corresponds to exactly 8 gallons. That inverse equation g = c/2.75 is the same relationship rearranged, not a new formula. Substituting 8 back into c = 2.75g returns 22, which confirms the answer without needing the receipt.