Deleting a page in Microsoft Word depends entirely on one thing: whether that page contains content or is only an empty block created by stray paragraph marks. For a page with text, images, or tables, press Ctrl+G, type the page number in the "Enter page number" box, hit Enter, close the dialog, and press Backspace or Delete. For a blank page, turn on Show/Hide (¶) and delete the paragraph marks pushing the page onto a new sheet. Desktop Word has no single "delete page" command, so every method below works by removing page content or the layout markers that create a page.
Why Word Has No Delete Page Button and What Replaces It
Microsoft has never shipped a one-click page deletion tool in Word for Windows or Mac, and that's a design choice, not an oversight. Word stores pages as a continuous stream of paragraphs, section breaks, and formatting marks; pagination is calculated on the fly from that stream. A "delete page" button would need to guess which characters constitute a page, and the guess would break the moment the layout reflowed.
The 2026 versions — Word for Microsoft 365, Word 2021, and Word 2024 — still follow that logic. What you get instead is a set of deletion paths that each match a different document condition: content pages, blank pages at the end, pages created by section breaks, table-driven pages, and pages in PDFs opened in Word.
Word counts pages the way a printer would. A single extra empty paragraph at the end of a document pushes the page count from 2 to 3, and that third page will look blank on screen but is a genuine page as far as headers, footers, and printing are concerned. Once you accept that a page is just a span of characters, deletion becomes a matter of selecting the right span.
The methods split cleanly by situation, and picking the wrong one wastes time or damages formatting. Deleting a section break to remove a blank page, for example, merges the two sections and can silently kill a header you set up separately. The table below is the decision map; the rest of the article drills into each row.
| Page situation | Best method | Primary risk |
|---|---|---|
| Page with visible content | Ctrl+G to page, then select and Delete | None if selection is correct |
| Blank page at document end | Show/Hide ¶, delete trailing paragraph marks | Removing the final paragraph mark deletes the last paragraph's formatting |
| Blank page mid-document | Delete the page break or section break causing it | Deleting a section break strips the following section's header/footer |
| Page after a table | Delete or shrink the trailing empty paragraph | Word always places one paragraph after a table |
| Page with content you want to keep elsewhere | Cut (Ctrl+X) instead of Delete | Clipboard overwritten by later copies |
| Page in a PDF opened in Word | Converted-document reflow ruins layout | Text boxes and columns shift |
Delete a Full Page of Content with the Go To Shortcut
The fastest reliable route to any page uses the Go To tab, which has existed in Word since the 1990s and still works identically in Word for Microsoft 365 as of the November 2026 builds. It jumps the cursor to the start of a page so you can select forward from a known anchor.
1: Press Ctrl+G on Windows or Option+Command+G on Mac. The Find and Replace dialog opens with the Go To tab active. 2: Type the page number in the "Enter page number" field. 3: Click "Go To" or press Enter. The cursor moves to the first character of that page. 4: Click "Close" to dismiss the dialog. 5: Hold Shift and click at the very end of the page's last line, or press Ctrl+Shift+End to select from the cursor to the document end if it's the final page. 6: Press Backspace or Delete.
On Windows, the F5 key opens the same dialog. The keyboard-only version is Ctrl+G, the page number, Enter, then Esc, then Ctrl+Shift+Down Arrow repeated to extend the selection — but clicking the endpoint is usually faster and less error-prone.
Selecting with the mouse is the failure point in this method. If your click lands one character short, you leave a fragment behind and the page count won't drop. After deleting, check the Word status bar at the bottom left: it shows "Page X of Y," and Y should decrease by one. If it doesn't, undo with Ctrl+Z immediately and reselect.
Word for the web behaves differently here. The browser version has a page navigation box in the status bar that works like Go To, but Backspace on a selected multi-page range can behave inconsistently across browsers. For web, delete paragraph by paragraph or switch to the desktop app; Microsoft's own support documentation for Word for the web lists limited page-handling features compared with desktop.
Remove a Blank Page at the End by Deleting Paragraph Marks
Blank pages at the end of a document are almost always caused by invisible paragraph marks, and they're the most common complaint Word support forums field. Delete the marks and the phantom page disappears.
1: On the Home tab, click the ¶ button (Show/Hide) in the Paragraph group. Ctrl+Shift+8 toggles it on Windows. 2: Scroll to the last page. You'll likely see one or more ¶ symbols sitting alone. 3: Click immediately after the final visible character of your real content. 4: Press Delete repeatedly until all the trailing ¶ marks are gone and the cursor sits at the end of the last real paragraph. 5: If a paragraph mark survives that won't delete, the document ends in a table or a section break — see the next sections.
Never select the document's final paragraph mark and delete it if you care about formatting. In Word, the last paragraph mark carries the document-level paragraph formatting and, in some templates, section properties. Deleting it merges the last paragraph's formatting into the preceding one, which is why a document with a distinctive final line can suddenly restyle.
A second cause of trailing blank pages is a manual page break. With ¶ visible, a page break appears as "---Page Break---". Click just before that marker and press Delete. Word's default View settings hide these markers, which is why users often see a blank page and no obvious cause.
Enable Show/Hide permanently during cleanup and turn it off afterward; a document littered with visible markers is easy to mis-edit. The setting is per-document in older versions and application-wide in Microsoft 365. One number worth knowing: a page break is a single character in the underlying file, so a document can contain dozens of them without any visible text.
Fix a Blank Page Caused by a Section Break or Page Break
Section breaks create blank pages in two ways: a "Next Page" section break forces the next section to start on a fresh page, and a stray break at the very end of a document generates a final empty page. Word offers four section break types in the Layout > Breaks menu — Next Page, Continuous, Even Page, and Odd Page — and the Even/Odd types can add up to one extra blank page to satisfy the parity rule.
To remove the page: turn on ¶, find the "---Section Break (Next Page)---" marker, click immediately before it, and press Delete. That removes the break and merges the sections. Then check Headers & Footers: the merged section inherits the header and footer of the section above.
That header loss is the real hazard. A Next Page section break exists precisely so one section can have different headers, footers, margins, or page numbering — Word's Help documentation notes that section breaks are required to vary headers by chapter or to restart page numbers. Deleting the break is easy; recreating the section's distinct formatting is not.
If the break belongs and only the blank page doesn't, shrink the gap instead. Reduce the space after the last paragraph before the break, or delete empty paragraphs between the text and the break marker. Another option: change the break from "Next Page" to "Continuous" in the Layout > Breaks menu by deleting the old one and inserting a new one at the right spot.
Odd Page and Even Page breaks almost always produce a blank page by design when the preceding section ends on an even page. Authors using these for print layouts should keep them. If you inherited the document and don't need parity, switching to Next Page removes the phantom sheet without altering content.
Delete a Page That Follows a Table
Word insists on placing at least one paragraph mark after every table. When a table ends exactly at the bottom of a page, that mandatory empty paragraph lands on the next page, and you get a page containing nothing but a ¶ symbol that often refuses to shrink.
The standard fix: select the paragraph mark itself (click just after it, then Shift+Left Arrow to capture it) and change its font size. Home tab, font size box, type 1 and press Enter. The paragraph shrinks to one point, often sliding back onto the table's page. If it still won't fit, reduce the table row heights or the page's bottom margin slightly.
Never press Delete with the cursor before that paragraph mark and then try to delete the table's last cell boundary — Word won't allow it and the merge attempt fails silently. The paragraph mark after a table is structural, and Word enforces it.
If the page is genuinely a blank page containing the mark and nothing else you need, you can delete the mark by selecting it and pressing Delete, but only if the table is followed by real content, such as a heading or closing paragraph. Deleting the last mark after a final table is the exception where Word permits it, and the table then becomes the final element of the document.
For long documents this appears repeatedly: every chapter that ends in a table generates its own blank page. The scalable fix is a slightly smaller bottom margin, applied via the section's page setup, rather than hand-deleting dozens of paragraph marks. A 0.1-inch margin reduction fits roughly one extra line per page in 11-point Calibri, enough to absorb the mark.
Remove a Page in Word for the Web, Mac, and Mobile
Platform differences matter more than most guides admit, because the shortcut set and even the presence of Show/Hide changes on each build. In Word for the web (Microsoft 365 on any browser), the ¶ button exists on the Home tab and trailing paragraph marks can be deleted normally; the gap is in page-level selection and printing behavior, which depends on the browser's own print dialog.
Mac Word 2024 and Microsoft 365 for Mac use Option+Command+G for Go To and Command+8 for Show/Hide. The menu path is Edit > Find > Go To. Selection behaves the same as Windows, but Mac keyboards lack a dedicated Delete-forward key on some models, so use Fn+Delete or the Delete key located above the Return key.
Word for iPad and iPhone dispenses with paragraph marks entirely and has no Go To function. To delete content there, select it by drag handles and tap Delete, or use the Home tab's Editing controls. Blank pages created by paragraph marks are effectively invisible on mobile, so handle those documents on desktop.
One platform-specific failure: documents stored in SharePoint or OneDrive and edited simultaneously. If a co-author is editing a section while you delete a section break, Word may refuse the edit or resolve it unpredictably. Check the presence indicators in the top-right corner of the ribbon and coordinate before large structural deletions. Microsoft's co-authoring documentation recommends saving and syncing before layout-level changes.
Use Find and Replace as a Surgical Blank-Page Remover
When a 200-page report has blank pages scattered throughout, deleting them one at a time is slow. Find and Replace can strip the two most common culprits in bulk, and the technique is underused because the special-character dropdown is easy to miss.
1: Press Ctrl+H to open Find and Replace. 2: In "Find what," click "More >>" then "Special" and choose "Manual Page Break" (the code ^m) to target page breaks, or "Paragraph Mark" (^p) to target empty paragraphs. 3: In "Replace with," leave the field empty. 4: Click "Replace All."
The catch: replacing ^p with nothing deletes every paragraph mark, collapsing the entire document into one paragraph. Never run that operation on a real document. The safe version targets two consecutive paragraph marks (^p^p) and replaces them with one (^p), which removes blank lines one level at a time; repeat Replace All until the count stops decreasing. Undo (Ctrl+Z) reverses a Replace All in one step, so a mistyped run is recoverable — but only until you save and close.
For page breaks specifically, ^m to nothing is safe and removes every manual break in the document. That's usually what you want in a document built by pasting from multiple sources, where every pasted chunk dragged its own page break along. Section breaks use a different code (^b) and removing all of them in bulk will merge every section, so handle those manually.
Test on a copy first. File > Save As, name it "cleanup-test," run the replace, review, then repeat on the original. For a document with 40 blank pages, bulk replacement takes about two minutes versus 20 or more for manual deletion, with the caveat that it can only target breaks, not content-bearing pages.
What to Do When a Page Refuses to Delete
If you've deleted everything visible on a page and it persists, one of five things is happening. Work through this list in order; each item has a different remedy.
Hidden text. Home tab, ¶ button; hidden text shows with a dotted underline. Select and delete it, or clear the Hidden attribute in the Font dialog (Ctrl+D). A frame or text box anchored to a previous page. Text boxes float and their anchor sits on another page's text. Click the anchor icon and delete the frame. A footnote or endnote. Deleting the reference mark doesn't remove the note text. Go to the References tab and delete the note itself. An image with "In line with text" wrapping forced onto its own page. Set wrapping to "Square" or shrink the image. Corrupt formatting. Select all (Ctrl+A), then Ctrl+Space to strip direct character formatting, and Ctrl+Q to reset paragraph formatting. This is destructive; save first.
The footnote case trips up experienced users most often. A footnote removed from the body text is renumbered and the surviving note remains at the bottom of its page, so deleting the body reference and watching the page persist feels like a Word bug when it's actually note management. The References tab's "Next Footnote" button cycles through and lets you find and delete orphans in a long document.
If none of the five applies, save the document as .docx, close Word fully, reopen, and retry. A stale in-memory layout can display a page that no longer exists in the file; repagination on reopen corrects it. Printing to PDF also forces a fresh pagination pass and reveals whether the page is real.
Undo a Bad Page Deletion and Protect the Document
Every deletion covered above is reversible with Ctrl+Z as long as Word stays open and the document hasn't been closed, but the undo stack has a limit. Word 2024 and Microsoft 365 retain up to 100 undo actions by default; a long editing session can push an early deletion off the stack.
For structural deletes — especially section breaks — save a copy first via File > Save As with a versioned filename. If you've already deleted a section break and lost a header, check File > Info > Version History in Microsoft 365 cloud documents; autosave versions every few minutes allow restoring a pre-edit state. Locally saved files without cloud sync have no version history, which is the strongest argument for keeping working drafts in OneDrive or SharePoint.
Track Changes is the safer route for reviewers. Turn it on before cleaning a document (Review tab > Track Changes, or Ctrl+Shift+E), and every deletion, including paragraph marks and section breaks, is recorded and individually rejectable. The tradeoff is visual clutter — Track Changes makes deletions look like struck-through text, and Word's display of deleted paragraph marks is easy to misread.
Finally, lock in the cleanup. If the document came from a template that regenerates blank pages, fix the template, not just the copy. Templates live in the Custom Office Templates folder on Windows and in the user's Group Containers path on Mac; editing and saving the template prevents the next dozen documents from repeating the problem you just spent an hour solving.
FAQ
Does deleting a page in Word delete its header and footer?
No, headers and footers belong to sections, not pages. That's why a header can survive the deletion of a whole page of text. Headers and footers are stored once per section and repeated across every page inside it. A blank page created by a Next Page section break still displays a header, and deleting the break removes that section's header settings.
Why does Word keep creating a blank page when I press Enter?
Each Enter inserts a paragraph mark, and once a paragraph mark passes the bottom margin, Word starts a new page. A string of unpressed Backspaces leaves empty paragraphs in their place. Press Ctrl+Shift+8 to reveal them. The fix is to press Delete from the end of the preceding text instead of adding or removing lines by feel.
Can I delete a page in Word without deleting the text?
Yes, and the method is Cut rather than Delete. Select the page content and press Ctrl+X, then paste it where you want it. Deleted content goes to the same clipboard as cut content anyway, but Cut is deliberate: the document drops the page and you keep a copy. Ctrl+Z after any deletion restores the page.
How many pages can I delete at once in Word?
As many as you can select. Go To page 3, hold Shift, Go To page 12, and press Delete to remove pages 3 through 12 in one action. Word's undo stack handles the operation as a single step. For larger spans, or to remove every blank page in a long file, the Find and Replace ^m technique is faster than selection.
Why won't the blank page at the end delete on my Mac?
The trailing paragraph mark is likely the document's final one, which Word protects. Select it and reduce the font size to 1 point rather than deleting it, or place the cursor just before it and press Delete once. If a section break sits above it, remove the break first. The same rules apply as on Windows.
Does deleting a page lower my page count in the status bar?
It should, but only if the page's content and the layout markers are both gone. The status bar shows "Page X of Y," where Y is recalculated by Word's pagination engine. If Y stays the same after deletion, an invisible break or trailing paragraph remains; a reprint preview (Ctrl+P) forces a fresh count and shows what's still there.
What happens if I delete a page that contains a table of contents entry?
The TOC doesn't update automatically. Right-click the table of contents and choose Update Field, then "Update entire table." Otherwise the TOC still lists the deleted heading with its old page number, and a reader clicking it lands on the wrong page. For documents with captions or cross-references, right-click each reference field and update separately.