A blank page at the end of a Word document is almost never an empty page — it's a trailing paragraph mark, a section break, or a table row that Word won't let you leave empty. Deleting a page means deleting whatever is holding it open. The reliable move is to switch on formatting marks with Ctrl+Shift+8 (Command+8 on Mac), find the mark just past the last visible content, and remove it. Content pages need a different tool: the Navigation Pane for quick jumps, or the Find and Replace dialog for bulk deletions. Every method below is built around that distinction.

Switch On Paragraph Marks Before Deleting Anything

Press Ctrl+Shift+8 on Windows or Command+8 on Mac and every paragraph mark, manual page break, and section break in the document becomes visible as a labeled symbol. This single toggle is the difference between guessing at a blank page and seeing exactly which mark produces it. Turn it on first, before you delete anything, because deleting blind is what creates the merged-paragraph messes people then spend ten minutes repairing.

Word stores two kinds of page endings, and the symbols tell them apart. A manual page break appears as a dotted line with the words "Page Break" in the middle. A section break appears as a double dotted line labeled "Section Break (Next Page)" or "Section Break (Odd Page)," depending on which type was inserted. Paragraph marks look like a small pilcrow (¶), and that pilcrow is the usual culprit behind an unwanted final page.

Click at the end of the last visible line and press the Show/Hide ¶ button on the Home tab's Paragraph group if you'd rather not memorize the shortcut. If you're on Word for the web, the same ¶ button lives on the Home tab, though the web version doesn't render section breaks as visible symbols. That limitation matters later, because blank pages caused by section breaks are effectively invisible in browser Word.

The setting travels with the document, not with your Word installation. A colleague who opens your file will see the marks only if their own Show/Hide is switched on. If you're sending a document for review and want the marks hidden, turn the toggle off again before saving — otherwise the recipient opens the file to a wall of pilcrows.

Remove a Trailing Blank Page Using Backspace and Delete

The trailing blank page — the one after your last sentence of content — accounts for most "how to delete a page in word" searches, and Backspace fixes it in seconds once you can see the marks. Click just before the final paragraph mark, on the blank page itself, and press Backspace until the page collapses. Word removes the page the moment no character, mark, or break remains on it.

One pilcrow cannot be deleted, and this is where people get stuck. Word requires a paragraph mark after the final character of the body, so if your document ends with a single empty paragraph, Backspace will stop working one mark short. The page disappears once you shorten the preceding content by even a fraction or reduce the empty paragraph's font size. Select that lone ¶ and set the font size to 1 point on the Home tab — the page collapses without a single visible character changing.

The order of operations matters on documents with manual page breaks. Pressing Delete at the end of the line before a break pulls the following content up onto the current page. Pressing Backspace at the start of the line after a break leaves an empty paragraph on the previous page and moves the break down — the blank page survives. Delete forward from the preceding line, not backward from the following one, when a manual break is the cause.

If the page refuses to vanish even after the marks are gone, look for an empty paragraph formatted with "Page break before" enabled. Open the Paragraph dialog from the Home tab, check the Line and Page Breaks tab, and clear that checkbox. It's a formatting attribute rather than a visible mark, which is why it survives every Backspace you throw at it.

Delete a Blank Page Stuck Behind a Table Using the 1-Point Trick

A table that ends on the last line of a page forces Word to insert an empty paragraph after it, because a document can't end with a table. That paragraph lands on a new page, and no amount of Backspace removes it. The standard fix is the font-size trick: select the paragraph mark after the table and set it to 1 point, then drag the paragraph's line spacing to "Exactly" 1 point in the Paragraph dialog.

Hiding the paragraph works too but changes the document's structure, and hidden text can reappear when someone else opens the file with formatting marks enabled. Setting the font to 1 point keeps the paragraph present and visible to Word's layout engine while shrinking it below the threshold that triggers a page. Choose the 1-point method for documents that will be edited by others; choose hiding only for files destined to be printed or exported as PDF.

Watch for a nested failure here. If the table sits inside a text box or a content control, the empty paragraph may belong to the container rather than the table, and shrinking it won't help. Click inside the stray paragraph and check the status bar or the selection outline to see which element owns it. A text box that's anchored to a page rather than to a paragraph will also keep resurrecting the blank page when content above it shifts.

Word for the web behaves differently with tables at the document's end. Because the web editor doesn't expose the same paragraph dialog options, the 1-point workaround isn't available there. Open the file in desktop Word to fix a table-induced blank page, then save. The fix persists when the file returns to the browser.

Delete Any Page Through the Navigation Pane and Ctrl+G

You don't need to scroll to reach a page you want gone. The Navigation Pane (View tab, then Navigation Pane) shows a thumbnail of every page in the left sidebar and lets you click straight to the one you mean. For a document with a dozen pages, this is faster than Ctrl+F and far faster than dragging the scrollbar. The pane also lists headings, so a document with styled headings lets you jump by section rather than page number.

Ctrl+G opens the Find and Replace dialog on its Go To tab. Type the page number and press Enter, and Word places the cursor at the top of that page. Combine it with Ctrl+Shift+End to select from that point to the document's end, which is the fastest way to delete everything after a given page without touching the pages before it. This bulk approach is genuinely useful when the tail of a document is obsolete; it is genuinely dangerous when a section break sits between the cursor and the end, because deleting across a section break also strips the section's formatting.

Assigning a keyboard shortcut to Go To saves repeated trips through the dialog. Word doesn't offer a default one, but you can record a macro that opens the dialog on the Go To tab and bind it to a key through File > Options > Customize Ribbon > Keyboard shortcuts. For anyone who edits long regulatory or academic documents weekly, the five minutes spent setting this up pays back quickly.

The Navigation Pane's thumbnails refresh as you edit, so deleting a page there gives you immediate visual confirmation that the page is gone rather than merely hidden. If a thumbnail lingers after deletion, the page still contains something — a mark, a break, or a paragraph with page-break formatting — and you're back to the formatting-marks check from the first section.

Delete a Section Break When the Blank Page Won't Budge

Section breaks are the most stubborn cause of blank pages and the least visible to anyone who hasn't switched on formatting marks. A "Section Break (Next Page)" forces everything after it onto a new page even when the break sits at the very end of the document, which is how a one-page letter turns into a two-page file. Click at the start of the break symbol and press Delete once; the page collapses instantly.

Check what the section carried before you delete it. Double-click the break to see whether the following section has different margins, a different header, column settings, or a landscape orientation. Deleting the break reconciles the two sections to the formatting of the section that follows, which can silently convert the page you just fixed into a formatting mess. Note the settings first, delete the break, then reapply whatever mattered.

Odd-page and even-page section breaks deserve special caution. A "Section Break (Odd Page)" is usually intentional — it's what puts each chapter of a book on a right-hand page in a printed document. Delete it and you lose that control permanently for the affected sections. If you're preparing a print-ready file for a book or a manual, the blank pages produced by odd-page breaks are doing their job; leave them.

In browser Word, section breaks and page breaks aren't visible symbols, so the diagnostic loop of "turn on marks, find the culprit, delete it" simply doesn't work. The navigation pane still exists, but the break-related causes of blank pages require the desktop application. Open the file in the installed version of Word, fix it, save, and sync back to OneDrive or SharePoint.

Delete a Page Without Deleting a Single Character

When the page's content should stay but its place in the document shouldn't, you have alternatives to deletion. Double-clicking a paragraph mark and applying a hidden-text attribute removes the page from the printed layout while keeping the text in the file. That's useful for a page of review notes you don't want in the final print copy but do want to retain for a colleague. Formatting marks must be visible to select hidden text, so keep the toggle on while you work.

Insert a continuous section break instead of deleting a page break when you want content to flow without a forced jump. A continuous break keeps the two sections on the same page, which removes the visual page break while preserving the distinction between sections. Apply it in the Page Setup dialog's Layout tab, or through Breaks on the Layout tab's Page Setup group.

Use text color set to white when the page's content needs to exist for a template or a mail-merge field but must never print. White text still occupies space in the layout, so it doesn't shrink the document the way hidden text does. Print it and the page comes out blank with the content invisible.

Page breaks inside tables, footnotes, and text boxes don't respond to any of the above. Word's own help documentation for Page Breaks notes that a manual break placed inside a table cell splits the table, and there's no way to remove the resulting page gap without restructuring the table. Split the table into two separate tables at the break's location if the layout demands it, or accept the split.

Two Clicks for Bulk Deletion When the Whole Tail Is Obsolete

Deleting several consecutive pages is a different task from fixing one stubborn blank page, and the fastest route is selection followed by a single delete. Click at the start of the first page you want gone, then Ctrl+Shift+End to select everything to the document's end. One press of Delete removes the lot. The corresponding combination for the middle of a document is Shift+click at the other boundary, which selects the span between the cursor and your click point.

Method Best for Key combo or setting Reversible?
Backspace to final mark Trailing blank page Ctrl+Shift+8 to find the mark Yes, Ctrl+Z
1-point paragraph trick Blank page after a table Home tab font size, "1" Yes, Ctrl+Z
Navigation Pane Jumping to a specific page View > Navigation Pane Yes, Ctrl+Z
Ctrl+G and Ctrl+Shift+End Deleting a page to the end Ctrl+G, type page number Yes until save
Section break removal Persistent blank page Layout > Breaks Reapplies on Ctrl+Z
Hidden text Content stays, page goes Font dialog, Hidden checkbox Yes, toggle Hidden off
Shift+click selection Deleting a range of pages Click start, Shift+click end Yes, Ctrl+Z

Selecting whole pages rather than partial content matters because Ctrl+Z after a bulk delete restores everything at once. Save before starting any batch deletion, so you have a version to return to if Word's undo history gets short. On large documents undo history can be truncated, which makes a saved copy your real safety net.

Delete Pages Fast on Mac and in Word for the Web With Different Paths

Mac Word maps the show-formatting toggle to Command+8, and the Delete key on a Mac keyboard is labeled "delete" but functions as Backspace. Press fn+Delete if your keyboard's delete key does nothing — on many Mac laptop keyboards the top-right key is a forward-delete and the documented instruction assumes the backspace behavior. This single difference accounts for a large share of "it won't delete" complaints from Mac users following Windows instructions.

The Go To dialog on Mac opens with Option+Command+G, not Ctrl+G, and typing a page number then Enter functions identically. Everything else in the paragraph-mark workflow translates directly: the ¶ button lives in the same place on the Home tab, section breaks render as the same double dotted lines, and the 1-point table trick produces the same result.

Word for the web caps the workflow at the visible. There's no paragraph-mark toggle that reveals section breaks, no paragraph dialog with page-break-before settings, and no access to the hidden-text formatting attribute. Blank pages caused by trailing paragraph marks can sometimes be removed from the browser by clicking at the end of the page and pressing Backspace, and the Navigation Pane is present for page navigation. Everything more structural needs the desktop application, and that's not a bug — it's a deliberate boundary in what the browser editor exposes.

The same boundary applies across mobile: the Word app on iOS and Android lacks the show-formatting toggle entirely, and page-level deletion inserts a page break but can't remove the structural causes of blank pages. Fix the underlying markup on a desktop before distributing the file to mobile reviewers.

Why Exported PDFs and Shared Files Show Pages Your Word File Hides

A Word document's page count and a PDF exported from it can disagree, and the discrepancy is usually deliberate. Trailing section breaks, odd-page breaks, and "next page" breaks all add pages in the PDF that a reader navigating the Word file doesn't perceive as content, because everything on the new page is empty markup. Check the PDF's page count after export and compare it to what Word's status bar reports — the difference tells you how many structural breaks remain.

Track changes is the other common culprit. Word's markup balloons can push content onto a new page that doesn't exist in the final version, and the truly bizarre variant is when the pages exist only in the "Final Showing Markup" view. Accept all changes and the pages disappear. Print the document with markup showing and you get extra pages that a reviewer receiving the clean version will never see.

Field codes that expand into long text — a cross-reference to a table, a mail-merge field, a TOC page count — can also shift page boundaries at save or print time. Word updates fields when the document is printed or exported, not while you're typing. Press Ctrl+A then F9 to force all fields to update before you conclude that a page can't be deleted; the update may rearrange the very content you were trying to position.

Shared documents compound this. If a colleague saved the file with a different default paper size or a different printer selected, Word's pagination shifts when the file reopens on your machine. Check the Layout tab's Size setting and the paper size stored in the document before blaming a phantom page, and note in the document's properties which paper size it's intended for.

FAQ

Why won't Word let me delete the last blank page?

Word requires a paragraph mark after the final content in the body, so a single empty paragraph at the end of a document can't be deleted and the page it occupies persists. The fix is to shrink that paragraph to 1-point font rather than delete it. Select the paragraph mark, set the font size to 1 on the Home tab, and the page collapses. If that doesn't work, check for a "Page break before" attribute in the Paragraph dialog's Line and Page Breaks tab.

Does deleting a page with Delete remove the text on it forever?

Yes, until you undo it or close the document without saving — and Word's undo history is shorter than people assume on long documents, so the recovery window can be narrow. Ctrl+Z immediately after the delete restores it. Once you save and close, the deletion becomes the document's permanent state unless you have a backup or version history. File > Info > Version History can recover earlier autosaved copies if your file is stored on OneDrive or SharePoint.

What's the difference between a page break and a section break when deleting?

A page break forces content onto a new page and nothing more; deleting it simply lets content flow back. A section break also creates a new page in its "Next Page" form but can carry page setup differences — margins, orientation, columns, headers and footers — and deleting it merges those settings with the following section. Word displays them with different symbols when formatting marks are on, and you can't manage section breaks in Word for the web at all.

How do I delete a page that only exists in the printed PDF?

Trailing section breaks and odd-page breaks add pages to the exported file that don't appear as content in Word. Open the document with Ctrl+Shift+8 active, scroll to the end, and look for a double dotted line labeled "Section Break" or "Odd Page" — delete it if the document doesn't need it. Also accept all tracked changes before exporting, because markup balloons can push content onto an extra page. Compare Word's page count to the PDF's after each fix.

Why does my blank page keep coming back after I delete it?

A paragraph with the "Page break before" formatting attribute, or a table followed by an empty paragraph, will regenerate the page each time Word repaginates. Both survive ordinary Backspace presses. Open the Paragraph dialog to clear the page-break-before checkbox, and apply the 1-point font trick to the paragraph after a table. A text box anchored to a page rather than a paragraph can also hold a page open, and moving the anchor inside the box's Format Object dialog is the only fix.

Can I delete a page on my phone?

The iOS and Android Word apps don't include the show-formatting toggle, so you can't see the marks that cause most blank pages. You can delete content on a page and Word will repaginate, but structural fixes — trailing paragraphs, section breaks, table-induced blank pages — need the desktop application. Fix the file on a computer and save it; the correction persists when the document returns to your phone.

Is there a limit to how many pages I can delete at once?

No fixed limit, but undo history constrains how many deletions can be reversed in one step. Selecting from a page to the document's end with Ctrl+Shift+End and pressing Delete removes everything in one operation, and one Ctrl+Z restores it — which is safer than ten separate deletes. Save the document first. On files longer than roughly a hundred pages, Word's undo buffer may already be near capacity before you start.

Does deleting a page in Word affect the table of contents or page numbers?

Yes, every automatic page number and TOC entry shifts when a page is removed. Word updates fields when you print, export, or press F9 with the document selected, not instantly on deletion. To confirm the document's real pagination, press Ctrl+A then F9 and let the fields recalculate. If the TOC still shows the old page count, right-click the TOC field and choose Update Field to refresh it manually.