You remove a page in Word by deleting its content and then removing the paragraph mark that sits at the end of the document, because that invisible mark is what keeps a blank page alive. Word has no "delete page" command on the ribbon. The method splits four ways depending on whether the page is normal text, a section break, a table, or a stubborn blank one at the end.

Why Word Has No Single Delete Page Button and What Replaces It

Word's page model is a print-layout illusion built on top of a continuous text stream, so a page exists only because content and paragraph marks push text onto it. That's why Microsoft's own support documentation sends you to the Navigation pane and the Backspace key rather than to a page command. The page is a result, and the thing you delete is the cause.

Two settings decide how much of the cause you can see. Turn on the Home tab's Show/Hide ¶ button, and Word displays every paragraph mark, manual page break, and section break in the document. Leave it off and you're deleting blind, which is how people accidentally join two paragraphs or wipe a heading.

The Navigation pane gives you the map. Press Ctrl+F, then click the Pages tab in the left panel, and Word renders a thumbnail for each page. Clicking a thumbnail places your cursor at the start of that page. This works in Word for Microsoft 365, Word 2024, 2021, 2019, and 2016 on Windows and the equivalent Mac releases, though the pane is narrower on Mac and the Pages tab may need a click on the small page icon.

A page number in the status bar counts rendered pages, not content blocks, so a page you cannot see in the pane is usually a phantom caused by a trailing mark. Check the status bar's word count against the page count when something doesn't add up.

Delete a Page by Selecting Its Content and Pressing Backspace

This is the default method for a page that holds ordinary text or images with no section break inside it. It takes about five seconds once the Navigation pane is open.

1: Press Ctrl+F and click the Pages tab in the Navigation pane. 2: Click the thumbnail of the page you want gone. 3: On the Home tab, click the arrow beside Select and choose Select All, or press Ctrl+Shift+End from the page start if the page runs to the document's end. 4: Press Backspace or Delete. 5: Check the page count in the status bar and press Ctrl+Z immediately if the count dropped by two.

Step 3 is where the method fails. Select All on a page click selects only that page's content in the pane's context, but if the page ends with a section break, that break may be excluded from the selection and survive the deletion, leaving a blank page behind. The tell is simple: content vanishes, page count stays the same.

If the deletion overshoots, Ctrl+Z restores everything in one step, which is faster than re-typing. For a document longer than 50 pages, the Pages tab can take a couple of seconds to render thumbnails; wait for the last thumbnail to appear before clicking.

Remove a Blank Page at the End of the Document

The blank last page nearly always holds one invisible paragraph mark that Word needs to end the document, and deleting it is not always allowed. Place your cursor at the very end with Ctrl+End, then press Backspace once. If the page disappears, you're done. If it doesn't, the mark is protected by a table or a section break immediately above it.

Tables are the common culprit. Word requires a paragraph mark after a table, so a document ending in a table has one non-deletable mark, and that mark can spill onto a page of its own. Select that trailing mark and set its font size to 1 point on the Home tab; the mark still exists but no longer takes a line, and the blank page collapses. Microsoft's support pages describe this same workaround for tables at the end of a document.

A manual page break left at the end behaves differently. With Show/Hide ¶ on, it appears as a dotted line labeled "Page Break." Click just before it and press Delete. If you instead see a double dotted line labeled "Section Break (Next Page)," the fix is in the next section, not this one.

Check the footer before you finish. A blank page that refuses to die sometimes carries a footer or page number field that Word treats as content, and the paragraph mark holding that footer has to go too.

Delete a Page That Contains a Section Break

Section breaks are page-level formatting instructions, and deleting one merges the formatting of the section before it into the section after it. That merge can change margins, headers, column layouts, and page orientation across everything below the break, which is why this deletion deserves a deliberate check rather than a reflex.

With Show/Hide ¶ on, the break appears as a double dotted line with the label "Section Break (Next Page)" or "Section Break (Continuous)." Click just before the label and press Delete. The break vanishes and the visible page collapses onto the previous one, taking its content with it. Undo with Ctrl+Z if the page count changes by more than one.

The formatting shift is the part nobody warns you about. A document with a landscape section for a wide table, followed by a portrait section for body text, loses the portrait formatting when you delete the break between them, because the landscape section's page setup now governs everything after it. Reapply the page setup through Layout > Size and Layout > Orientation before saving.

If you need the page gone but the formatting preserved, delete the content and the manual page break inside the section, then use Layout > Breaks > Next Page to re-establish the boundary one page earlier. That keeps the section structure intact while removing the page itself.

Delete a Page That Is Mostly a Table

Tables resist page deletion because Word will not let a table sit at the end of a document without something after it, and the something is always a paragraph mark. A selected table pressed with Delete removes the table's rows and cells but leaves that mark, so the page can survive with nothing visible on it.

Select the whole table first. Click inside it, then use the table handle at its top-left corner, or Table Layout > Select > Select Table on the ribbon. Press Backspace, not Delete, because Backspace removes the table structure along with its content, while Delete sometimes clears cells and leaves the grid.

With the table gone, follow the blank-page procedure: Ctrl+End, then Backspace on the trailing mark, or set that mark to 1 point if it won't budge. If the table spans a page boundary and you only want the second half gone, select just those rows and choose Table Layout > Delete > Delete Rows, which removes the rows without disturbing the paragraph mark below.

A table with merged cells across a page break can leave row fragments that resist row deletion. Split the merged cell first through Table Layout > Merge > Split Cells, then delete the rows normally.

Fix a Blank Page That Refuses to Disappear

Some blank pages survive every deletion because the thing generating them isn't content at all. Four causes account for nearly all of them, and each has a distinct fix.

Symptom Likely cause Fix
Blank page only when printing or in Print Preview Printer driver or "Print background colors" setting Update driver; check File > Options > Display
Page appears after a long paragraph Paragraph set to "Page break before" Home > Paragraph dialog > Line and Page Breaks > uncheck
Blank page after every section "Different first page" header conflict Design > Header & Footer > uncheck Different First Page
Page won't delete at document end Non-deletable mark after a table Set trailing mark to 1 pt font

The "Page break before" property is the sneakiest of the four, because the paragraph looks normal on screen and the break never shows in the Show/Hide view. Right-click the paragraph above the blank page, open Paragraph, and check the Line and Page Breaks tab. A checked box there inserts a page break that no amount of content deletion will remove.

Keep-with-next and keep-together settings can push a lone paragraph onto a fresh page as well. Select the whole document with Ctrl+A, open Paragraph, and clear those checkboxes if you suspect them, then reapply where you actually want them.

Strip Page Breaks and Use Find and Replace for Stubborn Pages

Manual page breaks are the most common single cause of an unwanted page, and Word's Find and Replace can remove all of them at once. This is worth knowing for a 200-page report where hunting each break by eye would take an afternoon.

Press Ctrl+H to open Find and Replace. In the Find what box, type ^m, which is Word's code for a manual page break. Leave Replace with empty, click Replace All, and Word reports how many replacements it made. For a section break, use ^b instead; for a paragraph mark, use ^p. Microsoft documents these codes in its Find and Replace reference.

Run the page-break pass first, and only then evaluate whether you still need the section-break pass, because ^b will delete every section break in the file including ones you want. Save a copy before running Replace All on a document whose section structure matters.

If the page you want gone is in the middle of the file and you've already tried content deletion, search for ^m and step through the matches with Find Next to see exactly which break sits on that page. Deleting one break at a time is slower but reversible. The Replace All path is best reserved for cleanup passes on documents with dozens of stray breaks.

Delete a Page on Word for Mac and Word for the Web

Mac Word's interface differs enough that the Windows instructions mislead people on the exact menu names. The Navigation pane lives under View > Sidebar > Navigation, and the Pages tab sits at the top of that sidebar. Selection happens with Command+Shift+End from the page start rather than Ctrl+Shift+End.

Show/Hide ¶ on Mac is a toolbar button labeled ¶ on the Standard toolbar, or Home > Paragraph mark in the newer ribbon. The Home tab's Select menu appears as Edit > Select All in some versions. Section breaks are deleted the same way: click just before the labeled break line and press Delete.

Word for the web has no Show/Hide ¶ toggle and no Navigation pane with page thumbnails, so deleting a page there means selecting the content and pressing Backspace, with no visibility into the breaks. Blank trailing pages caused by a non-deletable mark after a table cannot be fixed in the browser version at all; open the file in the desktop app. Microsoft's documentation recommends exactly that for structural edits.

If your document lives in SharePoint or OneDrive and opens in the browser by default, use the Editing menu's "Open in Desktop App" option before starting, or you'll spend ten minutes on a fix the web app can't complete.

Prevent Accidental Page Deletion With Track Changes and a Backup

Track Changes turns every deletion into a visible, reversible mark, which matters when the document belongs to someone else or passes through legal review. Turn it on with Ctrl+Shift+E before touching the page. Deleted content then appears as struck-through text rather than vanishing, and a reviewer who disagrees can restore it without hunting through undo history.

Version history is the second safety net. Files saved to OneDrive or SharePoint keep automatic versions, and File > Info > Version History lists them with timestamps. A deleted page recovered from version history within the retention window is usually faster than reconstructing anything. The retention window depends on the organization's settings, so confirm it with your administrator rather than assuming a fixed number of days.

Save a copy under a new name before any Replace All operation. Ctrl+Shift+S opens Save As, and a filename with a date suffix is enough. The 30 seconds this costs is the only reliable insurance against an irreversible structural edit.

For shared documents, check who else has the file open. Editing a page out of a document another person is actively working in creates conflicting versions, and the merge that follows can resurrect the deleted page or duplicate it. Co-authoring indicators in the title bar show active editors.

When to Split the Document Instead of Deleting a Page

Sometimes the page you want gone carries content that belongs somewhere else, and deleting it destroys work you'll need to redo. Word can split a document at a heading level in a few clicks, which is faster than cut-and-paste across two files.

Use the Navigation pane's Headings tab to confirm your heading styles are applied consistently, since the split command relies on them. Then open the Review tab and choose the split option your Word version provides, or save a copy and delete everything outside the target range in each copy. The two-file result preserves all formatting, headers, and footers per file.

Splitting is the right call when the page is a chapter, an appendix, or a distinct section that needs its own distribution. Deleting it and re-pasting into a new document loses section-level page setup, which you'd then have to rebuild manually, and that rebuilding is where most formatting errors creep in.

If the page is duplicated content rather than misplaced content, deletion is correct and splitting just spreads the problem. Check for duplicate headings in the Navigation pane before deciding; two identical headings usually mean a copy-paste artifact, not a structural need.

FAQ

Does deleting a page in Word delete it permanently?

No, in a normal editing session. Ctrl+Z reverses a page deletion in one step, and a file saved to OneDrive or SharePoint keeps prior versions in Version History accessible from File > Info. Permanence arrives only when you close without saving, empty the Recycle Bin after deleting the file itself, or overwrite the file after version history has rolled past the edit.

Why does a blank page appear after my table in Word?

Word requires a paragraph mark after every table, and that mark cannot be deleted, so a table ending near the bottom of a page pushes the mark onto a new page. Select the mark with Show/Hide ¶ turned on and set its font size to 1 point on the Home tab. The mark remains but occupies no visible line, and the blank page collapses.

Can I delete a page in Word without affecting page numbers?

Yes, if the page numbers come from a footer field rather than typed text. Deleting content shifts subsequent pages up and Word renumbers them automatically, because page number fields recalculate on render. If the numbers were typed manually, they will not update and you'll need to replace them with Insert > Page Number fields.

How do I delete multiple non-adjacent pages at once?

There's no native multi-select for non-adjacent pages in the Navigation pane. Delete each page individually with the content-selection method, or use Find and Replace with ^m to remove all manual page breaks in one pass and let the content reflow. The Replace All route is faster for documents with dozens of breaks but removes breaks you may want to keep.

What's the difference between a page break and a section break when deleting?

A page break pushes content to the next page and carries no formatting of its own, so deleting it merges two pages with identical layout. A section break defines page setup for everything after it, so deleting one applies the preceding section's margins, orientation, and headers to the content below, which can change the look of dozens of pages at once.

Why won't Word let me delete the last blank page?

The final paragraph mark in a document is required and cannot be removed, and it sits after any trailing table or section break. Delete the content above it first, then reduce the mark's font size to 1 point, or remove the section break that's forcing it onto its own page. If a footer field sits on that page, the mark holding it must be cleared too.

Does the page count in the status bar match what will print?

Usually, but not always. Word's status bar counts rendered pages including blank ones, and printer drivers can add or drop a page at the end depending on margin handling. Check File > Print and page through the preview before printing a long document, because the preview reflects the driver's own pagination rather than Word's screen layout.