Introduction
To remove a section break in Microsoft Word, switch to the Home tab, click the Show/Hide ¶ button to reveal formatting marks, place your cursor on the dotted line labeled "Section Break," and press Delete. That single keystroke erases the break — but it also strips the section formatting of everything that followed, so the merged text inherits the formatting of the section above it. On Windows, the keyboard shortcut Ctrl+Shift+8 toggles the same ¶ view; on Mac, it's Command+8. Everything below explains the four removal methods, the three formatting losses most guides never mention, and how to recover from each one.
Why Section Breaks Hide on the Page and How to Reveal Them
Section breaks are invisible by default because Word treats them as non-printing characters. Until you toggle formatting marks on, the break occupies no visible line at all, which is why so many people scroll past the thing they're trying to delete. Click the ¶ icon on the Home tab (it sits next to the paragraph-mark area in the Paragraph group), or press Ctrl+Shift+8 in Windows. The break then appears as a double dotted line running the width of the page with the label "Section Break (Next Page)," "Section Break (Continuous)," or one of the two odd/even variants.
The label matters because each type behaves differently after deletion. A Next Page break forces the following section to start on a fresh page; a Continuous break doesn't. When you delete a Continuous break, text flows together and page numbering can jump in ways that surprise you. When you delete a Next Page break, content that began on its own page merges into the previous page and can overflow. Note which type you're deleting before you touch the key.
Formatting marks also govern tables, tabs, and paragraph marks, so the view can look chaotic the first time. That's normal. You can leave ¶ on for the entire editing session and turn it off only for printing or PDF export; the toggle changes no actual document content. In Word for the web, the ¶ button sits in the same Paragraph group but lacks some keyboard equivalents, and the ribbon behaves differently in narrow browser windows.
One quirk worth knowing: if the ¶ button is greyed out, the document may be in Protected View, or you may have opened a read-only file. Close and reopen from a trusted location, or use File > Info > Enable Editing. Without edit permissions, no removal method below will work.
Method 1: Delete the Break with the Keyboard
This is the fastest route and the one to try first. Make sure ¶ is visible, click immediately before the "Section Break" dotted line, and press Delete. If your cursor is placed after the break instead, press Backspace. The break disappears, and the following section merges upward into the section above.
Watch what happens to the text after deletion. If the break was a Next Page type, the new merged content may leap onto the previous page and shove existing paragraphs down. That's not a bug; Word is reflowing content into the section above, including that section's margins, headers, and page orientation. If the result looks wrong, press Ctrl+Z immediately to restore the break and try a different method.
Deletion in Word for Mac follows the same cursor rule, but the Delete key on Apple keyboards behaves as Backspace on many layouts. If pressing Delete does nothing, try Fn+Delete. On Windows laptops with compact keyboards, the dedicated Delete key may require Fn as well.
If nothing happens when you hit Delete, the cursor is probably not adjacent to the break. Click once directly to the left of the dotted line, check that the blinking insertion point sits before the label, then delete. If the entire document refuses to edit, check for Track Changes being on — deletions become marked revisions rather than actual changes.
Method 2: Use Find and Replace to Strip Every Break at Once
When a long document carries a dozen or more section breaks, deleting them one by one is slow and error-prone. Find and Replace can target them all in a single pass, using Word's special-character codes. Press Ctrl+H, click "More >>" to expand the dialog, and use the Special dropdown.
| Step | Action | What to enter |
|---|---|---|
| 1 | Open Find and Replace | Ctrl+H |
| 2 | Expand options | Click "More >>" |
| 3 | Find field | Type ^b (section break) |
| 4 | Replace field | Leave blank |
| 5 | Execute | Click Replace All |
The code ^b matches section breaks specifically, not page breaks (^m) or manual line breaks (^l). After Replace All, Word reports how many replacements it made — a useful number to compare against your section count. If the count is higher than expected, you had hidden breaks inside text boxes or headers.
Replace All is destructive and irreversible beyond Ctrl+Z's single-level undo, so save a copy first via File > Save As. On documents with tracked changes enabled, Replace All can create revision marks instead of deleting, producing a messy redline. Turn Track Changes off before running it.
This method is the one to use when you're consolidating a template that has accumulated breaks over years of editing. It's also the way to strip breaks from a document you inherited and don't fully understand; delete all, then re-insert only the breaks you actually need.
Method 3: Delete a Section Break Without Losing the Formatting Below It
Here's the failure case most guides skip: deleting a section break doesn't only remove the break — it discards the section properties of the second section entirely. Margins, page orientation, header/footer links, column count, and page numbering all fall back to the section above. If your document had a landscape page in the middle of a portrait report, deleting that break turns the landscape page portrait.
The workaround is to copy the formatting you want to keep into the merged section before deleting. Select a paragraph in the section below the break, open the Paragraph dialog (right-click > Paragraph), and note its indents and spacing. Repeat for Page Setup values (Layout tab > Margins, Orientation, Size). After deletion, reapply the values to the merged text.
For headers and footers specifically, the loss is more subtle. A section with its own header that isn't linked to the previous section will, after break removal, take on the previous section's header. If you had a first-page-different header, it disappears. Capture the header text first (open the header, select all, copy to a scratch document), delete the break, then re-enter the text.
If you need the section-specific formatting and just want the break gone visually — you want the page to continue but preserve landscape — you can change the break type instead of deleting it. Double-click the break label, or place your cursor just above it and open Layout > Breaks; switching from Next Page to Continuous keeps both sections distinct while removing the forced page break effect. That's often the cleaner fix when someone says "remove the section break" but actually means "stop the page from jumping."
Method 4: The Navigation Pane and Go To Route
For documents with dozens of pages, the Navigation Pane shows headings but not section breaks. The reliable jump method is Go To. Press Ctrl+G, type \section into the "Go to what" reference box, and press Enter. Word jumps the cursor to the next section break, which you can then delete with a single keystroke.
This is faster than scrolling when breaks sit mid-document between long walls of text. Repeat Ctrl+G, Enter for each successive break. If you're removing many breaks in sequence, this pairs well with the keyboard Delete — jump, delete, jump, delete.
The Go To dialog accepts other useful codes: \page for page breaks, \footnote, \endnote, \comment. Knowing these lets you clean up an entire document's worth of invisible formatting in a few minutes. In Word 2016 through Microsoft 365 the codes are stable; older Word 2003 and earlier used a different dialog layout but the same backslash codes.
Pair this with the Show/Hide toggle to confirm each deletion visually. Blind deletion from the Go To dialog without ¶ visible risks removing something adjacent — a manual page break sitting next to the section break, for instance — that you didn't intend. Turn ¶ on first, always.
Restoring Page Numbers, Margins, and Headers After the Merge
Deleting a section break merges the sections, and the merged text takes on the lower section's page setup? No — the higher section's setup wins, and everything below re-flows into it. Page numbering that restarted at 1 in section 3 will, after removal, continue the numbering from section 2. Reapply page numbering by double-clicking the footer, opening Format Page Numbers, and setting "Continue from previous section" or restarting manually at the desired page.
Margins need a similar check. Go to Layout > Margins and confirm the values against the section above, or press Ctrl+Z to undo if the merge damaged the layout. The most common complaint after break removal is text that suddenly runs into the header area because the top margin shrank; the fix is to reset the top margin explicitly in the Paragraph or Page Setup dialog.
Headers and footers are the most fragile element. After merging, open the header and check the "Link to Previous" status on the Design tab. If the header in the merged section shows "Same as Previous" when it shouldn't, you've lost the section-specific header and must retype it. Save the header text to a notepad file before any deletion to avoid this entirely.
Columns behave similarly: a two-column section merged into a one-column section above will collapse to one column. All content in the formerly two-column text stacks vertically. This is easy to spot visually but confusing if you don't know why it happened.
What Actually Changes When You Delete a Continuous vs. Next Page Break
| Property | Continuous break deleted | Next Page break deleted |
|---|---|---|
| Page numbering | Usually continues smoothly | Restarts or jumps; check footer |
| Margins | Inherits from section above | Inherits from section above |
| Orientation | Reverts to above section | Reverts to above section |
| Header/footer | Reverts to above section | Reverts to above section |
| Columns | Reverts to above section | Reverts to above section |
| Page flow | Text reflows; may fit on same page | Text merges onto previous page |
The practical difference is that Continuous breaks are nearly invisible in their effects, while Next Page breaks often produce dramatic layout shifts because they were the reason the layout existed. If your document jumps ugly after deletion, it was almost certainly a Next Page break. Undo, convert it to Continuous via Layout > Breaks, and re-evaluate.
A subtle case worth flagging: a document can hold more than one break type at the same location. Word inserts a paragraph mark and a section break as separate characters. Deleting one may leave the other, so the layout doesn't change as expected. Turn on ¶, delete the section break line, and check whether a paragraph mark or page break remains; delete those too if needed.
Fixing the "Pagination Broken" Error That Follows a Bad Deletion
The most common follow-up complaint is that page numbers now count backward, or that a "Page X of Y" field shows Y as a smaller number than X. This happens when sections had "Start at" numbering settings that clashed. Fix by right-clicking the page number field, choosing Edit Field, selecting the numbering format, and setting "Start at" to the desired value.
A second failure: if the deleted section had track changes records inside it, Word may refuse to delete it and pop a dialog saying "This action is not available because the section is locked." Unlock via Review > Restrict Editing, then try deleting the break alone without touching the surrounding text.
Third failure: link-to-previous headers that become corrupt. If you delete a section break with a linked header and then undo, the link sometimes does not restore. Fix by double-clicking the header, opening the Design tab, and re-enabling Link to Previous manually. This is rare but well documented in Microsoft's support forums.
Always keep a backup copy before mass deletion. Ctrl+Z only undoes the last action per Word's internal limit — typically 100 actions — which sounds generous until you realize each keystroke counts. Save As a copy, then edit the copy, is the safest workflow.
How to Delete a Section Break Without a Mouse (and Without Breaking Anything)
If you're working in a document where the mouse is unreliable — a real scenario in tablet mode or remote desktop sessions — this sequence handles the whole job from keyboard alone. Turn on ¶ with Ctrl+Shift+8. Then use Arrow keys and Ctrl+Shift+8 to navigate.
1: Press Ctrl+Shift+8 to show formatting marks. 2: Use Ctrl+F to search for "Section Break" and press Enter to jump to the first occurrence. 3: Press the Left Arrow key once to position the cursor before the break. 4: Press Delete to remove the break. 5: Repeat Ctrl+F for the next occurrence, or use Ctrl+G > \section to jump to the next break. 6: Save with Ctrl+S when finished.
Handle the failure case as it appears: if you can't tell whether the cursor is before or after the break (the label sometimes wraps across lines), turn on ¶ and check visually. If the break is in a header or footer, the cursor must be in the body area — click into the main text region first, since Word disallows deletion of body breaks while the header is active. If the document is in compatibility mode (File > Info > Convert), some older Word 2003 breaks may not respond to the Delete key and require File > Save As to a modern .docx format first.
For users who frequently strip section breaks, recording a small macro with the keystrokes above is worth the five minutes. The macro can be assigned a keyboard shortcut via File > Options > Customize Ribbon > Keyboard shortcuts. Macro-based cleanup should be applied to a copy, never an open shared file.
FAQ
Does deleting a section break change the formatting of the text after it?
Yes. The text below the break loses the section's own page setup — margins, orientation, headers, page numbering — and inherits the section above. This is the single biggest surprise. Copy the values first if you need to keep them.
Can I delete all section breaks in a document at once?
Use Find and Replace with ^b in the Find field and nothing in Replace, then click Replace All. Word reports the count it removed. This is safe on a saved copy, but skip it if Track Changes is on, since Replace All creates revision marks instead.
Why does pressing Delete do nothing when I click on the section break?
The cursor isn't positioned on or before the break. Click directly to the left of the dotted line labeled "Section Break" and try again. If the document is in Protected View or read-only, no editing key works — enable editing first.
What's the difference between a page break and a section break?
A page break (^m in Find and Replace) just forces text to the next page. A section break (^b) ends a section with its own margins, headers, and numbering. Section breaks are the ones that carry formatting; page breaks don't.
Can I convert a Section Break (Next Page) into a Continuous break instead of deleting it?
Yes. Place your cursor just above the break, open Layout > Breaks, and choose Continuous. The section boundary remains, so header and page numbering settings survive, but the page no longer jumps to a new page.
Does removing a section break remove page numbers?
Not directly, but the numbering scheme changes. Numbers either continue from the section above or reset to 1 depending on the "Start at" setting. Check by double-clicking the footer, opening Format Page Numbers, and confirming the continuation setting.
Can I remove a section break that's inside a header or footer?
No. Section breaks live in the document body, not in headers or footers. If you see a dotted line inside a header, it's a paragraph border or a text box boundary, not a section break. Close the header first, then delete the body break.
Is there any risk of corrupting the document by deleting section breaks?
Low, but present if you delete many at once with Track Changes on, or if the document has unresolved tracked revisions inside the break area. Save a copy first; if Word complains that the section is locked, disable Track Changes and accept/reject pending revisions before retrying.