To reinstall an HP printer on this computer, delete the existing printer entry and its driver package, download the full-feature driver for your exact model from HP's support site, then run that installer and add the printer back over USB or Wi-Fi. The clean-uninstall step is the one people skip, and it's the reason a "successful" reinstall often prints nothing.

HP's own support documentation separates two paths: a full-feature software install and a basic "add printer" through Windows or macOS. Reinstalling properly means the first path. Windows 11 and macOS Sequoia also both keep old print queues alive after a device is removed, so the queue has to go before the new driver lands.

One boundary up front. If the printer itself won't power on, shows a permanent hardware error, or fails HP's own diagnostic, reinstalling software can't fix it. This is a software procedure, not a repair.

Uninstall the Old HP Software Before Anything Else

Start in Settings, not Devices and Printers. Windows 11 hides duplicate HP entries: Settings > Bluetooth & devices > Printers & scanners lists active queues, while the legacy Control Panel > Devices and Printers view can show stale ones the modern list ignores. Remove from both if the printer appears in both.

Order matters. Pull the printer out of the list first, then uninstall the software package, then reboot. Reversing that order leaves the driver package registered and Windows reinstalls a broken queue the moment the printer reconnects. HP's support pages describe this as removing the driver after removing the device.

For HP Smart, open Settings > Apps > Installed apps, find HP Smart, and choose Uninstall. If your model ships with the older HP Printer Assistant, it appears under a name like "HP OfficeJet Pro 9010 series Basic Device Software." Uninstall exactly that entry rather than hunting for a generic "HP" item.

Mac users go further. Apple's macOS keeps print queues in /Library/Printers and driver receipts in the system receipt database. Removing the printer from System Settings > Printers & Scanners is step one; deleting the leftover HP folder in /Library/Printers is step two. If you skip step two, the new install can inherit stale PPD files.

Keep one thing before you delete: the printer's current IP address if it's networked, and any saved scan-to-computer or scan-to-email destinations. Those settings live in the software, not the printer, and a reinstall wipes them.

Confirm Whether You Need HP Smart or the Full-Feature Driver

HP Smart is an app. The full-feature driver is a software package. They are not interchangeable, and picking wrong is the most common reason a reinstall produces a printer that prints but won't scan. HP bundles scanning, fax, and maintenance utilities into the full-feature package for most OfficeJet, DeskJet, and LaserJet models.

What you get HP Smart app Full-feature driver package
Basic printing Yes Yes
Scanning to computer Yes, app-dependent Yes, includes HP Scan
Fax send/receive No Yes on fax-capable models
Printhead alignment and cleaning tools Limited Yes, in Printer Assistant
Works offline after install Needs sign-in Yes
Typical install size Under 500 MB Over 1 GB on many OfficeJet models

The size difference is real and worth planning for. On a metered connection or a laptop with limited free space, HP Smart is the smaller footprint; the full package is the complete toolkit.

Here's the split rule. Home user who prints and occasionally scans on a DeskJet: HP Smart is enough. Office user with a LaserJet or OfficeJet Pro who scans to a folder, faxes, or runs maintenance routines: install the full-feature package. The trade-off is that the full package carries more background services and takes longer to install.

There's a third option people forget: the basic driver Windows pulls automatically through Windows Update. It prints. It does not scan, does not fax, and gives you no alignment tools. If your goal is a quick print fix on a shared machine, that's the lightest path, but know what you're giving up.

Download the Correct Driver for Your Exact Model and OS

HP's support site is organized by product number, not marketing name. "HP DeskJet 4155e" and "HP DeskJet 4155" can pull different packages, and the "e" series models are tied to HP+ enrollment. Enter the model exactly as printed on the front or bottom label β€” HP's support search accepts the product number in parentheses nearby, which is the unambiguous identifier.

Pick the operating system version, not just the name. Windows 11 24H2, Windows 10 22H2, macOS Sonoma 14, and macOS Sequoia 15 each have separate listings, and HP's support site flags which models have dropped driver support for older OS versions. A printer that worked on Windows 8.1 may have no current driver at all.

Watch for the "full software" versus "basic driver" label on the download page. HP's site lists both under the same model, and the file names differ. Grab the full software package unless you specifically want the minimal driver. The download page also states the file size and version number β€” record the version, because it's your evidence of what's actually installed later.

Windows 11 users should also know about HP's ARM situation. On Snapdragon-based Copilot+ PCs, some older HP models only have x86 drivers, and the installer will fail or fall back to a generic driver. HP's support pages list ARM-compatible models; check before you spend an hour on a download.

If HP's site doesn't list your model under your OS at all, that's the answer, not a bug. Older LaserJet and DeskJet units past their support window have no current driver, and the honest fix is the generic PostScript or PCL driver built into Windows, which prints but drops the HP-specific features.

Reinstall Over USB: Step-by-Step with Failure Handling

The USB path is the most reliable reinstall because it removes network variables from the equation. Run the installer first and let it prompt you to connect the cable β€” HP's installer expects that order for most current models.

1: Disconnect the USB cable from the computer, leave the printer powered on, and confirm the old queue is gone from Settings > Bluetooth & devices > Printers & scanners. 2: Run the downloaded HP installer as administrator. On Windows, right-click the file and choose Run as administrator; a standard double-click can fail silently on driver-signing steps. 3: Accept the license, then when the installer asks for a connection type, choose USB and connect the cable only when prompted. 4: Wait through driver installation. This is the slow part, often 3–8 minutes on the full-feature package, and interrupting it corrupts the install. 5: At the end, let the installer print a test page. A test page that prints confirms the queue, port, and driver all agree. 6: Open the printer software once, run printhead alignment if offered, and confirm scanning works before you close the installer.

If the installer stalls at "connecting to device," the cable or port is the usual suspect. Try a different USB port directly on the computer, not through a hub, and swap the cable. HP's setup troubleshooting names USB hubs and charge-only cables as the top two causes of a connection failure mid-install.

If Windows blocks the driver with a signature warning, stop and re-download from HP rather than forcing the install. A tampered or truncated download is not worth a forced driver. Verify the file size against the number on HP's download page.

Mac USB users follow the same order in the HP Smart installer or the HP Easy Start utility, which Apple's support documentation still points to for HP devices. The Mac installer prompts for the cable connection at the same point.

Reinstall Over Wi-Fi: Restoring the Network Queue

Network reinstalls fail for a different reason than USB ones: the printer's IP address has changed, or the queue points at the old one. Before you reinstall, print a network configuration page from the printer's control panel. It lists the current IP address and network name, and that page is your reference for the rest of the process.

1: Confirm the computer and printer are on the same network band. A 2.4 GHz-only printer and a 5 GHz-only laptop network are on different segments and won't see each other, even with the same password. 2: Power-cycle the printer: off, wait 30 seconds, on, let it reconnect, then re-print the network configuration page and check the IP. 3: Run the HP installer and choose wireless or network connection. The installer scans for the printer and, on current models, can push Wi-Fi credentials during setup. 4: If the scan finds nothing, choose the option to enter the IP address manually and type the address from the configuration page. 5: Finish the install, print a test page, then open the printer's web interface in a browser using that IP to confirm it responds.

The manual IP route matters because HP's discovery uses Bonjour and mDNS, and those get blocked on guest networks and segmented corporate Wi-Fi. If discovery fails but the printer answers at its IP, manual entry solves it. Network segmentation, not a broken driver, is the failure.

For printers that support it, reserve the IP address in your router's DHCP table after the reinstall. A dynamic address that changes on the next lease is the reason a working network printer suddenly goes offline weeks later. HP's documentation recommends a static or reserved address for exactly this reason.

If the printer was previously set up with HP+ and a cloud account, the reinstall may prompt for sign-in. Skipping it can limit some features on HP+ enrolled models. Confirm the enrollment status on HP's site before you assume sign-in is optional.

Clear Stale Print Queues When the Reinstall Prints Nothing

A printer that installs cleanly and still won't print usually has a stuck job holding the queue. Windows will show "1 document in queue" and refuse new jobs behind it. Clearing the queue is not the same as deleting the printer, and the queue survives a reinstall if the port didn't change.

Open Settings > Bluetooth & devices > Printers & scanners, select the printer, choose Open print queue, and cancel every job. Then stop the Print Spooler service, delete the contents of the spool folder at C:\Windows\System32\spool\PRINTERS, and restart the service. Microsoft's own print troubleshooting documentation describes this spooler reset as the fix for queues that won't clear through the normal interface.

Mac equivalent: System Settings > Printers & Scanners, open the queue, and use the Job menu to cancel all. If jobs persist, reset the printing system, which removes all printers and their queues β€” a bigger hammer, but it clears corruption the per-printer remove won't touch.

The other silent failure is a port mismatch. A reinstall can create a new port (for example, a WSD port) while the printer sits on a standard TCP/IP port at a known IP. Check the printer's port in printer properties; if it reads WSD and the printer is on a fixed IP, switch to a Standard TCP/IP port pointed at that address. WSD ports drop when the device stops announcing itself.

Expect the first test page after a spooler reset to take longer. The spooler rebuilds its job history, and on older machines the delay can reach a minute.

Set Defaults, Scanning, and Shared Access After the Install

A reinstall resets default paper size, print quality, and duplex preference. Set them explicitly before you walk away; otherwise the first job after reinstall is the one that prints single-sided on the wrong paper size.

In Windows, open printer properties from Settings, set preferences, and make sure "Let Windows manage my default printer" is off if you want your choice to stick. Microsoft's documented behavior is that Windows changes the default printer to the one used most recently when that toggle is on, which quietly overrides your reinstall.

Scanning needs its own confirmation. Open HP Scan or the HP Smart scan function once and run a preview. A preview that loads confirms the scan driver registered; a preview that hangs means the full-feature package didn't install completely, and a reinstall of that package is the fix.

For a shared printer on a home network, turn on sharing in printer properties and confirm the share name, then add it on the second computer by browsing to the share rather than running the installer again. Running two full installers for one printer creates duplicate software and competing background services.

Worth knowing for offices: HP's full-feature packages on managed Windows machines can install services that conflict with endpoint security policies. If IT manages the machine, check the policy before running the installer, and prefer the basic driver plus a shared queue where software installs are restricted.

When Reinstalling Won't Fix It: Hardware and Firmware Limits

Reinstalling software addresses driver, queue, and configuration faults. It cannot fix a printhead that's dried out, a fuser that's failed, or a printer stuck in an error state the panel reports. If the printer's control panel shows a hardware error code, look that code up on HP's support site before touching software again.

Firmware sits in the middle. HP pushes firmware updates through the printer software and through HP Smart, and a printer with mismatched firmware can behave oddly after a software reinstall. Check the installed firmware version on the printer's configuration page and compare it to HP's current version for the model; updating firmware after a clean reinstall, not before, avoids the install being interrupted by a firmware prompt.

The ink subscription complication is real. Printers enrolled in HP's Instant Ink program are tied to the account, and a reinstall that skips sign-in can leave the printer reporting supply status incorrectly. If your model is enrolled, sign in during setup and let the software sync.

Past a certain age, the honest answer is replacement. HP's support pages list end-of-support dates by model, and once a printer is past that date, driver updates stop and newer OS versions eventually drop it. Reinstalling on an unsupported combination is a temporary fix, and the money spent on a workaround is better put toward a current model.

FAQ

Does reinstalling the HP printer delete my saved scan settings?

Yes, most scan-to-computer and scan-to-email shortcuts live in the software, not the printer, and a full uninstall removes them. Jot down the folder paths and email destinations before you start. Scan-to-network-folder settings stored on the printer itself survive a software reinstall.

Why does my printer show up twice after I reinstall it?

Windows keeps both the modern queue in Settings and the legacy entry in Control Panel > Devices and Printers, and a reinstall can recreate one without updating the other. Remove the duplicate from the list you didn't use, then print a test page to confirm the working queue. Two active queues with the same name will send jobs to the wrong one.

Can I reinstall an HP printer without HP Smart?

Yes. HP's support site offers the full-feature driver package as a separate download for most current models, and it installs without the HP Smart app. You lose the app's guided setup and some cloud features. The full package still includes HP Scan and the maintenance tools.

Is the Windows built-in driver good enough instead of HP's software?

For plain printing, yes β€” Windows Update supplies a basic HP driver that installs in minutes with no download. It won't scan, fax, or run printhead maintenance. Use it as a stopgap on a shared or low-storage machine, and switch to the full package when you need those functions.

How long should a full reinstall take?

Plan 15–20 minutes end to end on a typical home connection: about 3–5 minutes to uninstall and reboot, 3–8 minutes to download the package, and 3–8 minutes for installation depending on USB or network. Full-feature packages over 1 GB on a slow connection can push the download past 15 minutes alone.

What if the installer can't find my printer on Wi-Fi?

Print the network configuration page and enter the printer's IP address manually in the installer instead of relying on discovery. Guest networks and segmented office Wi-Fi block the discovery protocols HP uses. If the printer answers at that IP in a browser, the network is fine and manual entry will finish the install.

Does reinstalling fix a printer that prints garbled text?

Sometimes. Garbled output usually means the wrong driver language β€” a PostScript driver sent to a PCL-only printer, or the reverse. Reinstall with the exact package for the model rather than a generic HP driver. If garbling persists on the correct driver, a failing cable or port is the next check.

Should I reinstall before or after updating the printer's firmware?

Update firmware after the clean reinstall, not before. The installer may prompt for a firmware update mid-install and interrupt it, and a firmware update on top of a half-removed driver is the messiest combination. Get the software stable, then update firmware through the installed tools.