Chlorine has the greater electronegativity: 3.16 on the Pauling scale against sodium's 0.93, so answer b. cl is correct. The gap of 2.23 units sits far past the 1.7 threshold most textbooks treat as an ionic bond, which is why sodium chloride is the standard classroom example of a complete electron transfer. That only holds if you're comparing the neutral atoms as the question intends. Compare the ions instead and the ranking shifts, which is where most people get caught out.

Pauling Values for Sodium and Chlorine: 0.93 Versus 3.16

Linus Pauling built his scale in 1932 by relating bond energies to the difference in electronegativity between the two atoms involved, and he anchored the scale so fluorine, the most electronegative element, sits at 4.0. Sodium's 0.93 places it among the strongest electron donors on the periodic table, while chlorine's 3.16 places it among the strongest acceptors still forming ordinary covalent bonds. The subtraction is simple: 3.16 minus 0.93 equals 2.23.

The single most useful number here is that 2.23. Almost every introductory chemistry course teaches a rough rule that a difference above about 1.7 produces a predominantly ionic bond, and sodium chloride clears that bar by more than half a unit. That isn't a law of nature so much as a convenient line, and real bond character varies smoothly rather than flipping at a threshold. Still, for exam purposes the arithmetic gives you the answer without any periodic table gymnastics.

One caveat matters for anyone reading values off a chart. Pauling electronegativities are not measured directly — they're derived from thermochemical data, and different editions and tables quote slightly different figures for the same element. Sodium is variously listed as 0.93 or 0.9, chlorine as 3.16 or 3.1. The difference between the two elements is so large that no plausible version of the table changes the verdict, which is not true for close pairs like carbon and hydrogen.

For a sense of scale, the entire Pauling range runs from about 0.7 for francium to 4.0 for fluorine, roughly 3.3 units of spread. The 2.23-unit gap between sodium and chlorine consumes two-thirds of that spread. These two elements are not close competitors — they sit near opposite ends of the donor-acceptor spectrum, which is exactly why the pair is chosen for teaching.

Why the Position in the Periodic Table Settles the Comparison

Electronegativity rises left to right across a period and falls down a group, and both trends explain this pair. Sodium sits at the far left of period 3 in group 1, with a single valence electron in a 3s orbital that it sheds readily. Chlorine sits at the right of the same period in group 17, one electron short of a full shell. Moving across period 3 from sodium to chlorine means increasing nuclear charge without adding a new shell, so the nucleus pulls harder on the same valence level.

Because both elements occupy period 3, the "down a group" trend doesn't complicate things. If the question had compared sodium with lithium (0.98) or chlorine with fluorine (3.98), the group trend would matter. Here only the left-to-right trend operates, and it operates in one direction across eleven positions. The result is a clean win for chlorine, with no competing effect to reason about.

There's an important physical consequence worth knowing. The 2.23-unit difference means the bonding electron pair in NaCl is displaced so far toward chlorine that the atoms exist as Na⁺ and Cl⁻ ions in the solid lattice, not as a shared pair. Chlorine's high pull effectively strips sodium's lone valence electron away. That's a description of the outcome, not a mechanism — but the direction is unambiguous.

Sodium's low value reflects more than its position. A lone electron in an outer shell, shielded imperfectly from an 11-proton nucleus, is held loosely and released at modest energy cost — the first ionisation energy of sodium is about 496 kilojoules per mole according to standard reference tables. Chlorine, needing one more electron to close its shell, releases energy when it gains one. Those two tendencies point the same way and compound.

The Full Answer Set: Checking A Through D in Order

The question offers four options, and it's worth running each one to ground so you can see why three fail. The table below compares what each answer claims with what the evidence supports, using Pauling values taken from standard reference tables.

Option Claim Pauling value (Na / Cl) Verdict Reason it fails or holds
a. Na Sodium is more electronegative 0.93 / 3.16 Incorrect Sodium sits near the donor end of the scale
b. Cl Chlorine is more electronegative 0.93 / 3.16 Correct Chlorine is 2.23 units higher
c. They are equal Neither is higher 0.93 / 3.16 Incorrect An 11-position period gap rules this out
d. Cannot be determined Insufficient information 0.93 / 3.16 Incorrect Neutral-atom Pauling values are tabulated

Option (d) deserves the most attention because it's the tempting escape hatch when a question feels ambiguous. The phrase "greater electronegativity" normally refers to the neutral atom's tabulated value, and both atoms have well-established Pauling figures. Nothing about the question lacks data. The only genuine ambiguity is ionic versus atomic, which is covered later.

Option (a) is the common error for students who confuse electronegativity with reactivity in the opposite direction — sodium is famously reactive, but its reactivity comes from giving electrons away, which is precisely the low-electronegativity behaviour. Reactive and electronegative are not synonyms. Sodium is reactive because it wants to lose an electron; chlorine is reactive and electronegative because it wants to gain one.

Option (c) is essentially never correct for two elements in different groups of the same period, since the periodic trend guarantees some difference. Equal electronegativity only plausibly arises between elements diagonally adjacent in the p-block, and even then only approximately. For sodium and chlorine, equality would require the periodic trend to reverse, which it does not.

Why the Na⁺ and Cl⁻ Ions Flip the Ranking

Here's the edge case that trips people up. Electronegativity is defined for an atom in a molecule, and the values quoted for ions are not the same as for neutral atoms. If you ask which species has the higher electronegativity between Na⁺ and Cl⁻, the intuitive answer reverses: the sodium cation, having lost its loosely held electron, now holds its remaining electrons very tightly and its effective electronegativity rises sharply — some tables place it near or above chlorine's neutral value.

The exact figures here are debated, and it's important not to invent precision. What's defensible is the direction: removing the single outer electron from sodium makes the remaining electron cloud subject to the full nuclear charge with no screening from the 3s electron, so the species becomes a powerful acceptor of electron density. Chlorine as the chloride ion has a filled shell and is far less hungry for electrons than neutral chlorine. The comparison isn't simply the same as the neutral-atom one.

For the exam question, this doesn't matter, because the standard convention compares neutral atoms and every textbook table gives chlorine the higher value. But you should be able to say why the ion comparison differs, because that's the kind of follow-up question that separates a memorised answer from an understood one. State the convention you're using before you compare.

This also explains why sodium chloride's bonding is described as ionic rather than polar covalent. In the solid, the ions are already formed; electronegativity has done its work in determining which atom keeps the electron. Once the transfer is complete, the question of which atom "pulls harder" on a shared pair becomes moot, because there is no shared pair left to argue about.

Using the 1.7 Rule: Ionic, Polar, and Nonpolar in Practice

The 1.7 threshold isn't arbitrary folklore — it's an empirical convention that reflects how bond character distributes, but it's worth seeing where it holds and where it misleads. Sodium chloride, at 2.23, is comfortably ionic. Moving to a closer pair like hydrogen chloride, the difference between hydrogen (2.20) and chlorine (3.16) is 0.96, producing a strongly polar covalent bond rather than an ionic one, and HCl is a gas that dissolves in water to give an acidic solution rather than a lattice of ions.

The rule is a classifier, not a predictor of every property. A bond with a difference just under 1.7 can still show substantial ionic character, and one just over can still have covalent features. The 1.7 line is a teaching convention whose real function is to give you a quick sorting criterion. For sodium and chlorine, you don't need the line at all — the difference is so large that the assignment is obvious.

What the rule gives you is a way to check your reasoning. If you know chlorine is 3.16 and sodium is 0.93, you can compute 2.23 and immediately classify. That's a two-step process that works for any pair. The only failure mode is using the wrong table or comparing an atom with an ion, both of which are avoidable by checking which convention the source uses.

One caution on tables: some older references include transition metals, and some list only main-group elements. When you look up sodium and chlorine, confirm the source is giving Pauling values for neutral atoms, not a different scale. Mulliken electronegativity, which averages ionisation energy and electron affinity, produces different raw numbers with a different scale, though the ranking of sodium versus chlorine is unchanged.

How Electronegativity Is Measured, and Why the Number Is Not Direct

It's worth being clear about what the 3.16 actually is. Pauling did not measure a force or a voltage; he constructed the scale by fitting thermochemical bond-energy data, then adjusted it so that fluorine landed at 4.0 as a reference point. The consequence is that electronegativity is a relative, derived quantity, not an absolute property of an isolated atom in the way that mass or atomic number is.

That's why the 1.7 threshold is a convention rather than a constant of nature, and why different tables can quote slightly different values for the same element without either being wrong. If a table gives sodium as 0.9 and chlorine as 3.2, the difference is still above 2, and the answer is unchanged. The structure of the question is robust to table variation precisely because the gap is so wide.

This has a practical implication for anyone preparing an exam or a lab report. When you cite a value, cite the scale as well as the number — "Pauling electronegativity of chlorine, 3.16" is meaningful, while "chlorine is 3.16" invites confusion with other scales. The Mulliken scale, for example, produces numbers on a different footing entirely, and mixing the two in a single comparison is a genuine mistake.

If you're checking a value you found somewhere and can't verify it, the place to confirm is a current periodic table from a recognised chemistry reference — the values themselves are stable enough that any standard textbook table will agree on the direction and magnitude of this particular comparison. The specific figures of 0.93 and 3.16 are widely reproduced in those tables.

Comparing Electronegativity With Other Periodic Properties

Confusing electronegativity with other periodic properties is one of the most common sources of the wrong answer, and the table below sets the relevant ones side by side for sodium and chlorine so the distinctions are visible.

Property Sodium Chlorine Direction for the pair
Electronegativity (Pauling) 0.93 3.16 Chlorine much higher
First ionisation energy (kJ/mol, standard tables) about 496 about 1,251 Chlorine much higher
Atomic radius (pm, standard tables) about 186 about 99 Chlorine much smaller
Electron affinity (kJ/mol) about 53 about 349 Chlorine much more negative
Ionisation energy (kJ/mol, standard tables) about 496 about 1,251 Chlorine about 2.5 times sodium

Notice how consistently the trend runs. Sodium's first ionisation energy (about 496 kJ/mol) is roughly 2.5 times lower than chlorine's (about 1,251 kJ/mol), which means it costs far less energy to remove sodium's electron than to remove one of chlorine's. That fits the picture: sodium parts with an electron easily, chlorine guards its own tightly and accepts another.

Electron affinity tells a similar story — chlorine's affinity is far more negative, meaning it releases much more energy on gaining an electron. That's why chlorine doesn't need a partner to want electrons but is actively drawn to acquiring them. It's the same underlying preference expressed in different units.

All these measures point the same direction, which is a useful consistency check. If your reasoning on one of them gave a different answer, you'd know something went wrong. In a real exam you won't need all four, but if a question is phrased in terms of "which atom holds its electrons more tightly", any of these numbers supports the same conclusion.

Answering the Format: What the Question Is Actually Asking

The phrasing "select an answer a. na b. cl c. they are equal d. cannot be determined" tells you what kind of response the demonstrator expects: a short battery of options, with one correct, and a distinction between confidence and uncertainty baked in. On an exam, the answer you write is the letter, and you should write it without hedging. Chlorine is b.

If you're using this as a mock question, the trap is to treat "cannot be determined" as a safe default when you aren't sure. That option exists to reward mistakes about definitions, not to shield the unsure. The neutral-atom convention is the standard one, so the data is sufficient. Pick (b) and be prepared to explain the arithmetic if asked for justification.

What the correct answer should be worth in your own working: you should be able to state the two Pauling values, subtract them, and interpret the result as a bond-type prediction. That's three separate pieces of competence — recall, arithmetic, and interpretation — and a one-letter answer only demonstrates the first two. If an examiner asks you to justify, the justification is the difference of 2.23 and its meaning.

If you're instead using this to build a quiz for students, that structure is worth borrowing: ask for the answer, then ask why equal or indeterminate are wrong. The error patterns in the table earlier map directly onto misconception categories — confusing reactivity with electronegativity, and treating the ion convention as the atom convention. Those are the two things worth teaching, more than the arithmetic.

Frequently Asked Questions

Does the answer change if the question asks about electronegativity in a different direction?

Using the standard convention, no — neutral chlorine is always the more electronegative of the two. What changes is the language: if a question asks "which atom holds its electrons more tightly in the neutral state", the answer is chlorine; if it asks "which species attracts electrons more strongly as an ion", the answer can reverse for the sodium cation. Always read which species the question names.

Why is "cannot be determined" wrong?

Because both values are tabulated for neutral atoms on a standard scale — sodium at 0.93 and chlorine at 3.16 on the Pauling scale — so the comparison is fully determined. That option is a distractor for ambiguity, and there is no ambiguity once you fix the convention. If a question genuinely lacked data, it would specify the species or the scale.

Is sodium more reactive even though it has lower electronegativity?

Yes, and the two facts sit comfortably together — sodium is reactive precisely because its electronegativity is low. It gives up its outer electron readily, and that willingness is the same property that makes the electronegativity number small. Reactivity and electronegativity measure different things, and for metals they tend to move in opposite directions.

What is the electronegativity difference for sodium chloride, and what does it mean?

The difference is 3.16 minus 0.93, which equals 2.23 Pauling units. A difference of that size places the bond well above the roughly 1.7 threshold that textbooks use to classify bonding as predominantly ionic, so NaCl is treated as ionic in standard teaching. The result is a lattice of Na⁺ and Cl⁻ ions rather than a shared covalent pair.

How do the values compare if I use a different electronegativity scale?

The scale changes the numbers but not the ranking — sodium remains well below chlorine on the Mulliken scale too. Raw values from different scales aren't interchangeable, so never mix a Pauling figure with a Mulliken figure in one calculation. For this pair, the gap is large enough that any standard scale gives the same direction.

Could two elements in different groups of the same period ever have equal electronegativity?

Only approximately, and not for this pair. The left-to-right trend across a period is monotonic for the main-group elements, so moving eleven positions from sodium to chlorine guarantees a substantial increase. Genuine near-equality is more plausible between diagonally placed elements in the p-block than between a group 1 metal and a group 17 halogen.

What if the question is comparing the elements in a compound rather than as free atoms?

That's the ionic-versus-atomic ambiguity. In the NaCl lattice, the question of which atom pulls the shared pair is moot because the electron has been fully transferred. If a question explicitly compares Na⁺ with Cl⁻, check the source's convention first — the ranking there can differ from the neutral-atom comparison, and examiners sometimes set that trap deliberately.